FBR07HA850NA-00 [TAIYO YUDEN]
Ferrite Bead,;
| 型号： | FBR07HA850NA-00 |
| 厂家： | 
TAIYO YUDEN (U.S.A.), INC |
| 描述： | Ferrite Bead, |
| 文件： | 总75页 (文件大小：13942K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2014. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incor-
porating such products, which are caused under the conditions other than those specified in this catalog or indi-
vidual specification.
■ Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification
is available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in ad-
vance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may
occur in connection with a third party's intellectual property rights and other related rights arising from your usage
of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
MULTILAYER CHIP BEAD INDUCTORS(BK SERIES)
WAVE＊
REFLOW
＊Except for BK0402, BK0603, BK1005, BKH1005
■PARTS NUMBER
*Operating Temp. : -55～+125℃
△＝Blank space
B
K △
①
1
6
0
8
H
S
1
2
1
－
⑤
T
△
⑦
②
③
④
⑥
①Series name
Code
④Nominal impedance
Code
Series name
Multilayer chip bead inductor
Nominal impedance［Ω］
（example）
150
BK△
15
BKH
101
100
②Dimensions（L×W）
Code
102
1000
Dimensions
Type（inch）
（L×W）［mm］
0.4×0.2
⑤Characteristics
0402
0603
1005
1608
2125
0402（01005）
0603（0201）
1005（0402）
1608（0603）
2125（0805）
Code
－
Characteristics
Standard
0.6×0.3
1.0×0.5
⑥Packaging
1.6×0.8
Code
T
Packaging
Taping
2.0×1.25
③Material
Code
HW
⑦Internal code
Material
Code
△
Internal code
Standard
HS
HR
HM
Refer to impedance curves
for material differences
LM
LL
TS
TM
／
■STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY
Standard quantity [pcs]
Type
L
W
T
e
Paper tape
Embossed tape
BK 0402
（01005）
BK 0603
BKH0603
（0201）
0.40±0.02
0.20±0.02
0.20±0.02
0.10＋0.04/－0.03
20000
－
（0.016±0.001）
（0.008±0.001）
（0.008±0.001）
（0.004＋0.002/－0.001）
0.60±0.03
0.30±0.03
0.30±0.03
0.15±0.05
15000
10000
－
－
（0.024±0.001）
（0.012±0.001）
（0.012±0.001）
（0.006±0.002）
BK 1005
BKH1005
（0402）
1.00±0.05
0.50±0.05
0.50±0.05
0.25±0.10
（0.039±0.002）
（0.020±0.002）
（0.020±0.002）
（0.010±0.004）
BK 1608
（0603）
1.6±0.15
0.8±0.15
（0.031±0.006）
1.25±0.2
0.8±0.15
（0.031±0.006）
0.85±0.2
0.3±0.2
（0.012±0.008）
0.5±0.3
4000
4000
－
－
－
（0.063±0.006）
2.0＋0.3/－0.1
（0.079＋0.012/－0.004）
2.0＋0.3/－0.1
（0.049±0.008）
1.25±0.2
（0.033±0.008）
1.25±0.2
（0.020±0.012）
0.5±0.3
BK 2125
（0805）
2000
（0.079＋0.012/－0.004）
（0.049±0.008）
（0.049±0.008）
（0.020±0.012）
Unit：mm（inch）
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
94
■PARTS NUMBER
●BK 0402
Nominal impedance
［Ω］
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［mA］（max.）
Thickness
［mm］
Parts number
EHS
Impedance tolerance
BK 0402HS100-T
BK 0402HS700-T
BK 0402HS121-T
BK 0402HM100-T
BK 0402HM750-T
BK 0402HM121-T
BK 0402HM151-T
BK 0402HM181-T
BK 0402HM241-T
BK 0402LL220-T
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
10
70
±5Ω
±25％
±25％
±5Ω
100
100
100
100
100
100
100
100
100
100
0.10
0.37
0.53
0.07
0.45
0.60
0.65
0.75
0.90
0.70
540
280
240
750
260
220
200
200
200
150
0.20 ±0.02
0.20 ±0.02
0.20 ±0.02
0.20 ±0.02
0.20 ±0.02
0.20 ±0.02
0.20 ±0.02
0.20 ±0.02
0.20 ±0.02
0.20 ±0.02
120
10
75
±25％
±25％
±25％
±25％
±25％
±25％
120
150
180
240
22
●BK 0603
Nominal impedance
［Ω］
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［mA］（max.）
Thickness
［mm］
Parts number
EHS
Impedance tolerance
BK 0603HS220-T
BK 0603HS330-T
BK 0603HS800-T
BK 0603HS121-T
BK 0603HS241-T
BK 0603HS601-T
BK 0603HM600-T
BK 0603HM121-T
BK 0603HM241-T
BK 0603HM471-T
BK 0603HM601-T
BK 0603HR102-T
BK 0603HR122-T
BK 0603LL100-T
BK 0603LL220-T
BK 0603LL330-T
BK 0603LL470-T
BK 0603LL560-T
BK 0603LL800-T
BK 0603LL121-T
BK 0603TS800-T
BK 0603TS121-T
BK 0603TS241-T
BK 0603TS601-T
BK 0603TM800-T
BK 0603TM121-T
BK 0603TM241-T
BK 0603TM601-T
BKH0603LM601-T
BKH0603LM102-T
BKH0603LM152-T
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
22
33
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
0.065
0.070
0.40
0.45
0.65
1.20
0.25
0.40
0.80
1.05
1.20
1.15
1.30
0.25
0.45
0.55
0.70
1.00
1.30
1.50
0.18
0.23
0.32
0.75
0.18
0.23
0.38
0.85
1.50
2.50
3.20
500
500
200
200
200
150
200
200
200
100
100
220
200
200
200
150
150
100
100
100
500
450
400
270
450
400
300
250
160
130
115
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
80
120
240
600
60
120
240
470
600
1000
1200
10
22
33
47
56
80
120
80
120
240
600
80
120
240
600
600
1000
1500
／
●BK 1005
Nominal impedance
［Ω］
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［mA］（max.）
Thickness
［mm］
Parts number
EHS
Impedance tolerance
BK 1005HW680-T
BK 1005HW121-T
BK 1005HW241-T
BK 1005HW431-T
BK 1005HW601-T
BK 1005HS100-T
BK 1005HS330-T
BK 1005HS680-T
BK 1005HS800-T
BK 1005HS121-T
BK 1005HS241-T
BK 1005HS431-T
BK 1005HS601-T
BK 1005HS102-T
BK 1005HR601-T
BK 1005HM750-T
BK 1005HM121-T
BK 1005HM241-T
BK 1005HM471-T
BK 1005HM601-T
BK 1005HM102-T
BK 1005LL100-T
BK 1005LL220-T
BK 1005LL330-T
BK 1005LL470-T
BK 1005LL680-T
BK 1005LL121-T
BK 1005LL181-T
BK 1005LL241-T
BK 1005LM182-T
BKH1005LM601-T
BKH1005LM102-T
BKH1005LM152-T
BKH1005LM182-T
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
68
120
240
430
600
10
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
0.17
0.24
0.31
0.50
0.60
0.03
0.06
0.10
0.10
0.20
0.30
0.45
0.55
0.58
0.60
0.18
0.18
0.30
0.45
0.50
0.70
0.11
0.18
0.25
0.33
0.31
0.45
0.50
0.70
0.90
0.85
1.25
1.50
2.00
500
450
400
350
300
1,000
700
700
700
500
400
350
300
300
300
350
300
300
250
250
150
500
400
400
350
400
350
300
250
120
300
250
200
200
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
33
68
80
120
240
430
600
1000
600
75
120
240
470
600
1000
10
22
33
47
68
120
180
240
1800
600
1000
1500
1800
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
95
■PARTS NUMBER
●BK 1608
Nominal impedance
［Ω］
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［mA］（max.）
Thickness
［mm］
Parts number
EHS
Impedance tolerance
BK 1608HW121-T
BK 1608HW241-T
BK 1608HW431-T
BK 1608HW601-T
BK 1608HS220-T
BK 1608HS330-T
BK 1608HS470-T
BK 1608HS600-T
BK 1608HS800-T
BK 1608HS121-T
BK 1608HS241-T
BK 1608HS601-T
BK 1608HS102-T
BK 1608HM121-T
BK 1608HM241-T
BK 1608HM471-T
BK 1608HM601-T
BK 1608HM102-T
BK 1608LL300-T
BK 1608LL470-T
BK 1608LL560-T
BK 1608LL680-T
BK 1608LL121-T
BK 1608LL181-T
BK 1608LL241-T
BK 1608LL331-T
BK 1608LL431-T
BK 1608LL511-T
BK 1608LL681-T
BK 1608LM751-T
BK 1608LM152-T
BK 1608LM182-T
BK 1608LM252-T
BK 1608TS431-T
BK 1608TS601-T
BK 1608TS102-T
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
120
240
430
600
22
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
0.15
0.25
600
450
400
300
1,500
1,200
900
800
600
500
400
350
300
350
300
250
250
200
500
400
400
300
300
250
250
200
200
200
150
300
250
200
200
400
350
300
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.30
0.40
0.05
33
0.08
47
0.10
60
0.10
80
0.10
120
240
600
1000
120
240
470
600
1000
30
0.18
0.25
0.45
0.60
0.20
0.35
0.45
0.60
0.70
0.20
47
0.30
56
0.30
68
0.35
120
180
240
330
430
510
680
750
1500
1800
2500
430
600
1000
0.50
0.65
0.80
0.85
0.85
0.90
1.00
0.60
0.75
0.85
1.10
0.21±30％
0.27±30％
0.30±30％
●BK 2125
Nominal impedance
［Ω］
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［mA］（max.）
Thickness
［mm］
Parts number
EHS
Impedance tolerance
BK 2125HS150-T
BK 2125HS220-T
BK 2125HS330-T
BK 2125HS470-T
BK 2125HS750-T
BK 2125HS101-T
BK 2125HS121-T
BK 2125HS241-T
BK 2125HS431-T
BK 2125HS601-T
BK 2125HS102-T
BK 2125HM121-T
BK 2125HM241-T
BK 2125HM471-T
BK 2125HM601-T
BK 2125HM102-T
BK 2125LL560-T
BK 2125LL121-T
BK 2125LL241-T
BK 2125LM751-T
BK 2125LM152-T
BK 2125LM182-T
BK 2125LM252-T
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
15
22
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
0.05
0.05
0.05
0.05
0.10
0.10
0.15
0.20
0.25
0.30
0.40
0.15
0.20
0.25
0.25
0.35
0.20
0.30
0.35
0.30
0.35
0.45
0.75
1,200
1,200
1,200
1,000
1,000
900
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
1.25 ±0.2
1.25 ±0.2
33
／
47
75
100
120
240
430
600
1000
120
240
470
600
1000
56
800
600
500
500
300
800
600
500
500
400
600
120
240
750
1500
1800
2500
400
300
400
400
300
200
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
96
■ ELECTRICAL CHARACTERISTICS
BK0402
■
BK0402 HS100
BK0402 HS700
BK0402 HS121
BK0402 HM100
30
25
20
15
10
5
100
80
250
250
200
150
100
50
200
150
100
50
60
Ｚ
Ｒ
40
Ｚ
Ｚ
Ｒ
Ｒ
Ｚ
20
Ｒ
Ｘ
Ｘ
1000
Ｘ
1000
Ｘ
1000
0
0
0
0
1
10
100
10000
1
10
100
10000
1
10
100
10000
1
10
100
1000
10000
Frequency [MHz]
Frequency [MHz]
Frequency [MHz]
Frequency [MHz]
BK0402 HM121
BK0402 HM750
BK0402 HM151
BK0402 HM181
350
300
250
200
150
100
50
450
400
350
300
250
200
150
100
50
300
250
200
150
100
50
300
250
200
150
100
50
Ｚ
Ｚ
Ｒ
Ｒ
Ｘ
Ｚ
Ｒ
Ｚ
Ｒ
Ｘ
Ｘ
Ｘ
0
0
0
0
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
Frequency [MHz]
Frequency [MHz]
Frequency [MHz]
Frequency [MHz]
BK0603
■
BK0603 HS220
BK0603 HS330
BK0402 LL220
BK0402 HM241
100
80
100
80
60
40
20
250
500
400
300
200
100
0
200
150
100
60
40
20
0
Ｚ
Ｒ
Ｘ
Ｚ
Z
R
Ｚ
Ｒ
Ｒ
50
0
Ｘ
X
Ｘ
0
1
1
10
100
1000
10000
10
100
1000
1000
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
Frequency [MHz]
Frequency［MHz］
Frequency [MHz]
Frequency [MHz]
／
BK0603 HS601
1000
800
600
400
200
250
250
200
150
100
50
200
150
100
50
R
Z
Z
R
Z
X
X
X
R
0
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
10000
1
10
100
1000
10000
Frequency［MHz］
BK0603 HM241
BK0603 HM471
500
400
1000
800
250
200
150
100
50
250
200
150
100
50
Z
Z
300
200
100
600
400
200
0
R
R
X
Ｘ
0
1
1
10
100
1000
10000
1
10
100
1000
10000
10
100
10000
1
10
100
1000
10000
Frequency［MHz］
Frequency［MHz］
BK0603 HM601
BK0603 HR102
Z
BK0603 HR122
BK0603 LL100
1000
800
600
400
200
0
1500
1000
500
0
2000
1500
1000
500
0
250
200
150
100
50
Z
Z
R
Z
X
R
R
Ｘ
Ｘ
Ｘ
R
0
1
10
100
1000
10000
Frequency［MHz］
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
97
■ ELECTRICAL CHARACTERISTICS
BK0603 LL330
BK0603 LL220
BK0603 LL470
BK0603 LL560
500
500
400
250
200
150
100
50
500
400
Z
400
300
200
100
0
R
300
200
100
0
300
200
100
0
Z
R
Z
Z
Ｒ
Ｒ
Ｘ
X
X
X
0
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
Frequency［MHz］
Frequency［MHz］
Frequency［MHz］
Frequency［MHz］
BK0603 TS800
BK0603 TS121
BK0603 LL800
BK0603 LL121
200
250
200
1000
800
1000
800
150
100
600
400
200
0
600
400
200
0
150
100
50
Z
Z
Ｒ
Z
R
Ｚ
R
Ｒ
50
0
Ｘ
100
Ｘ
X
1000
X
0
1
10
100
10000
1
10
100
1000
10000
1
10
100
1000
10000
1
10
1000
10000
Frequency［MHz］
Frequency［MHz］
Frequency［MHz］
Frequency［MHz］
BK0603 TS241
BK0603 TS601
BK0603 TM800
BK0603 TM121
500
400
1000
800
200
250
200
150
100
300
200
100
0
600
400
200
0
150
100
50
R
Z
Ｚ
Ｚ
Ｚ
Ｒ
50
0
Ｒ
Ｒ
Ｘ
1000
Ｘ
100
Ｘ
X
0
1
10
100
1000
10000
1
10
1000
10000
1
10
100
1000
10000
1
10
100
10000
Frequency［MHz］
Frequency［MHz］
Frequency［MHz］
Frequency［MHz］
／
BK0603 TM241
BK0603 TM601
BK0603 LM601
BKH0603 LM102
2500
2000
500
400
1000
800
2000
1500
Ｚ
300
200
100
0
600
400
200
0
1500
1000
Ｚ
Ｚ
1000
500
0
Ｒ
Ｚ
Ｒ
Ｘ
500
0
Ｒ
Ｘ
Ｒ
Ｘ
100
Ｘ
1
10
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
Frequency［MHz］
10000
Frequency［MHz］
Frequency［MHz］
Frequency［MHz］
BK1005
■
BKH0603 LM152
BK1005 HW680
BK1005 HW121
BK1005 HW241
3000
2500
2000
1500
1000
250
200
250
200
500
400
Ｚ
150
100
50
150
100
50
300
200
100
0
Ｒ
Ｚ
Z
Ｒ
Z
R
R
Ｘ
500
0
Ｘ
100
X
X
0
1
0
10
100
1000
10000
1
10
100
1000
10000
1
10
1000
10000
1
10
100
1000
10000
Frequency［MHz］
Frequency［MHz］
Frequency［MHz］
Frequency［MHz］
BK1005 HS330
BK1005 HW431
BK1005 HS100
BK1005 HW601
100
80
1000
800
100
80
1000
800
60
40
20
0
600
400
200
0
60
40
20
0
600
400
200
0
Z
Z
R
R
R
Z
Z
R
X
X
X
X
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
Frequency［MHz］
Frequency［MHz］
Frequency［MHz］
Frequency［MHz］
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
98
■ ELECTRICAL CHARACTERISTICS
BK1005 HS800
BK1005 HS680
250
200
150
100
50
250
250
200
200
150
100
50
150
100
50
Z
R
Z
Ｒ
X
X
0
0
0
1
10
100
1000
10000
1
10
100
1000
10000
Frequency［MHz］
Frequency［MHz］
BK1005 HR601
BK1005 HS431
BK1005 HS102
1000
1000
800
2000
800
600
400
600
1000
400
200
0
Z
Z
200
0
R
R
X
100
Frequency［MHz］
X
100
0
1
10
1000
10000
1
10
1000
10000
Frequency［MHz］
BK1005 HM750
BK1005 HM121
500
400
200
150
250
200
Z
300
200
150
100
50
100
R
50
0
100
0
X
1000
0
1
10
100
1000
10000
1
10
100
10000
Frequency［MHz］
／
BK1005 LL220
BK1005 HM102
BK1005 LL100
250
2000
250
200
150
100
200
150
1000
100
50
0
50
0
0
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
BK1005 LL470
BK1005 LL330
BK1005 LL680
500
400
300
500
500
400
300
200
400
300
200
200
100
0
100
0
100
0
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
BKH1005 LM601
BK1005 LM182
1400
1200
1000
800
600
400
200
0
2500
2000
1500
1000
Z
Ｚ
Ｒ
Ｘ
R
500
0
X
1
10
100
1000
10000
1
10
100
1000
10000
Frequency [MHz]
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
99
■ ELECTRICAL CHARACTERISTICS
BK1608
■
BKH1005 LM102
2500
BKH1005 LM152
BKH1005 LM182
3000
3000
2500
2000
1500
1000
500
2000
1500
1000
2500
2000
1500
1000
500
Z
Z
R
R
Z
500
0
R
X
X
X
0
0
1
10
100
1000
10000
／
BK1608 LL300
BK1608 LL470
BK1608 LL560
500
500
500
250
250
250
0
0
0
1
1
10
100
1000
10000
1
10
100
1000
10000
10
100
1000
10000
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
100
■ ELECTRICAL CHARACTERISTICS
BK1608 LL680
BK1608 LL121
500
1500
250
750
0
0
1
10
100
1000
10000
1
10
100
1000
4000
2000
BK2125
■
／
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
101
■ ELECTRICAL CHARACTERISTICS
1000
Z
500
R
X
0
1
10
100
1000
1000
500
Z
R
X
0
1
10
100
1000
／
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
102
MULTILAYER CHIP BEAD INDUCTORS (BK ARRAY SERIES)
REFLOW
■PARTS NUMBER
*Operating Temp. : -55～+125℃
△＝Blank space
B
K
△
3
2
1
6
4
S
6
0
1
－
T
△
⑥
①
②
③
④
⑤
①Series name
Code
④Nominal impedance
Code
Series name
Multilayer chip bead Inductor
Nominal impedance［Ω］
（example）
601
BK△
600
②Dimensions（L×W）
Code
102
1000
Dimensions
Type（inch）
（L×W）［mm］
2.0×1.0
⑤Packaging
Code
2010
3216
2010（0804）
3216（1206）
Packaging
Taping
3.2×1.6
－T
③Material
Code
4W
⑥Internal code
Material
Code
△
Internal code
Standard
4S
Refer to impedance curves
for material differences
4M
4L
■STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY
／
Standard quantity [pcs]
Type
L
W
T
E1
E2
P
Embossed
Paper tape
tape
BK 2010
（0804）
BK 3216
（1206）
2.0±0.15
1.0±0.15
0.45±0.05
0.25＋0.15/－0.1
0.25±0.15
0.5±0.1
4000
－
－
（0.079±0.006） （0.039±0.006） （0.018±0.002） （0.010＋0.006/－0.004） （0.010±0.006） （0.020±0.004）
3.2±0.2
1.6±0.2
0.8±0.1
0.35±0.2
0.3±0.2
0.8±0.1
4000
（0.126±0.008） （0.063±0.008） （0.031±0.004）
（0.014±0.008）
（0.012±0.008） （0.031±0.004）
Unit：mm（inch）
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
103
■PARTS NUMBER
●BK 2010
Nominal impedance
［Ω］
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［mA］（max.）
Parts number
EHS
Impedance tolerance
BK 20104W680-T
BK 20104W121-T
BK 20104W241-T
BK 20104S121-T
BK 20104S241-T
BK 20104S431-T
BK 20104S601-T
BK 20104M121-T
BK 20104M241-T
BK 20104M431-T
BK 20104M601-T
BK 20104M102-T
BK 20104L050-T
BK 20104L100-T
BK 20104L220-T
BK 20104L330-T
BK 20104L470-T
BK 20104L680-T
BK 20104L121-T
BK 20104L181-T
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
68
120
240
120
240
430
600
120
240
430
600
1000
5
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
0.35
0.40
0.50
0.30
0.45
0.55
0.70
0.30
0.45
0.55
0.70
0.80
0.10
0.15
0.20
0.30
0.40
0.50
0.70
0.90
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
10
22
33
47
68
120
180
●BK 3216
Nominal impedance
［Ω］
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［mA］（max.）
Parts number
EHS
Impedance tolerance
BK 32164W121-T
BK 32164W241-T
BK 32164W431-T
BK 32164W601-T
BK 32164S600-T
BK 32164S121-T
BK 32164S241-T
BK 32164S301-T
BK 32164S471-T
BK 32164S601-T
BK 32164S102-T
BK 32164M121-T
BK 32164M241-T
BK 32164M301-T
BK 32164M471-T
BK 32164M601-T
BK 32164M102-T
BK 32164L680-T
BK 32164L121-T
BK 32164L181-T
BK 32164L241-T
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
120
240
430
600
60
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
0.15
0.25
0.35
0.40
0.18
0.18
0.30
0.40
0.40
0.45
0.68
0.20
0.35
0.45
0.50
0.60
0.80
0.35
0.55
0.65
0.75
100
100
100
100
200
200
200
200
200
200
100
150
150
150
150
100
100
200
200
150
150
120
240
300
470
600
1000
120
240
300
470
600
1000
68
120
180
240
／
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
104
■ ELECTRICAL CHARACTERISTICS
BK2010
■
BK2010 4W680
BK2010 4W121
BK2010 4S431
BK2010 4M431
BK2010 4W241
BK2010 4S601
BK2010 4M601
BK2010 4S121
BK2010 4M121
BK2010 4M102
500
250
500
400
300
200
100
BK2010 4S241
500
400
300
200
1000
800
600
400
1000
800
600
400
500
250
100
200
200
BK2010 4M241
2000
1000
2000
1000
／
BK2010 4L050
BK2010 4L100
BK2010 4L220
BK2010 4L330
100
100
200
100
500
250
50
50
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
BK2010 4L470
500
250
1
10
100
1000
10000
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
105
■ ELECTRICAL CHARACTERISTICS
BK3216
■
／
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
106
MULTILAYER CHIP BEAD INDUCTORS FOR POWER LINES(BK SERIES P TYPE)
WAVE＊
REFLOW
＊Except for BKP0603, BKP1005
■PARTS NUMBER
*Operating Temp. : -55～+85℃
△＝Blank space
B
K
P
1
6
0
8
H
S
1
8
1
－
⑤
T
△
⑦
①
②
③
④
⑥
①Series name
Code
④Nominal impedance
Code
Series name
Nominal impedance［Ω］
（example）
330
BKP
Multilayer chip bead inductor for power line
33
②Dimensions（L×W）
Code
101
100
390
Dimensions
Type（inch）
391
（L×W）［mm］
0402
0603
1005
1608
2125
0402（01005）
0603（0201）
1005（0402）
1608（0603）
2125（0805）
0.4×0.2
0.6×0.3
1.0×0.5
1.6×0.8
2.0×1.25
⑤Characteristics
Code
－
Characteristics
Standard
⑥Packaging
Code
T
Packaging
Taping
③Material
Code
HS
Material
⑦Internal code
Code
△
Internal code
Standard
HM
Refer to impedance curves
for material differences
TS
TM
EM
■STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY
／
Standard quantity [pcs]
Type
L
W
T
e
Paper tape
Embossed tape
BKP0402
（01005）
BKP0603
（0201）
0.40±0.02
（0.016±0.001）
0.6±0.03
0.20±0.02
（0.008±0.001）
0.3±0.03
0.20±0.02
（0.008±0.001）
0.3±0.03
0.10＋0.04/－0.03
（0.004＋0.002/－0.001）
0.15±0.05
20000
－
15000
10000
4000
－
－
－
（0.024±0.001）
1.0±0.05
（0.012±0.001）
0.5±0.05
（0.012±0.001）
0.5±0.05
（0.006±0.002）
0.25±0.1
BKP1005
（0402）
（0.039±0.002）
1.6±0.15
（0.020±0.002）
0.8±0.15
（0.020±0.002）
0.8±0.15
（0.010±0.004）
0.3±0.2
BKP1608
（0603）
（0.063±0.006）
2.0＋0.3/－0.1
（0.079＋0.012/－0.004）
（0.031±0.006）
1.25±0.2
（0.031±0.006）
0.85±0.2
（0.012±0.008）
0.5±0.3
BKP2125
（0805）
4000
－
（0.049±0.008）
（0.033±0.008）
（0.020±0.012）
Unit：mm（inch）
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
107
■PARTS NUMBER
●BKP0402
Nominal impedance
［Ω］
Measuring frequency
［MHz］
DC Resistance
［mΩ］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Parts number
BKP0402HM100-T
EHS
Impedance tolerance
±5Ω
RoHS
10
100
70
1.1
0.20 ±0.02
●BKP0603
Nominal impedance
［Ω］
Measuring frequency
［MHz］
DC Resistance
［mΩ］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Parts number
EHS
Impedance tolerance
BKP0603HS100-T
BKP0603HS220-T
BKP0603HS330-T
BKP0603HS800-T
BKP0603HS121-T
BKP0603HM100-T
BKP0603HM220-T
BKP0603HM330-T
BKP0603HM800-T
BKP0603HM121-T
BKP0603TS220-T
BKP0603TS330-T
BKP0603TM220-T
BKP0603TM330-T
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
10
22
33
80
120
10
22
33
80
120
22
33
22
33
±5Ω
±25％
±25％
±25％
±25％
±5Ω
100
100
100
100
100
100
100
100
100
100
100
100
100
100
30
65
1.3
1.0
1.0
1.0
0.85
1.3
1.0
1.0
1.0
0.80
1.8
1.5
1.8
1.5
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
0.30 ±0.03
70
120
150
30
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
70
70
120
180
40
55
40
55
●BKP1005
Nominal impedance
［Ω］
Measuring frequency
［MHz］
DC Resistance
［mΩ］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Parts number
EHS
Impedance tolerance
BKP1005EM100-T
BKP1005EM300-T
BKP1005EM600-T
BKP1005EM121-T
BKP1005EM221-T
BKP1005EM331-T
BKP1005HS100-T
BKP1005HS330-T
BKP1005HS680-T
BKP1005HS121-T
BKP1005HS221-T
BKP1005HM121-T
BKP1005HM221-T
BKP1005TS330-T
BKP1005TS680-T
BKP1005TS121-T
BKP1005TM121-T
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
10
30
±5Ω
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
30
35
2.4
2.2
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
0.50 ±0.05
60
60
1.7
120
220
330
10
85
1.55
1.00
0.80
2.0
150
220
30
33
50
1.7
68
75
1.5
120
220
120
220
33
140
1.0
200
0.80
1.1
120
180
0.90
1.7
39±30％
55±30％
70±30％
100
68
1.5
120
120
1.3
1.3
●BKP1608
／
Nominal impedance
［Ω］
Measuring frequency
［MHz］
DC Resistance
［mΩ］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Parts number
EHS
Impedance tolerance
BKP1608HS330-T
BKP1608HS600-T
BKP1608HS101-T
BKP1608HS121-T
BKP1608HS181-T
BKP1608HS271-T
BKP1608HS391-T
BKP1608HS471-T
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
33
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
100
100
100
100
100
100
100
100
25
40
3.0
2.5
1.7
2.7
1.5
1.2
1.0
1.0
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
0.80 ±0.15
60
100
120
180
270
390
470
50
35
75
110
140
180
●BKP2125
Nominal impedance
［Ω］
Measuring frequency
［MHz］
DC Resistance
［mΩ］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Parts number
EHS
Impedance tolerance
BKP2125HS330-T
BKP2125HS600-T
BKP2125HS101-T
BKP2125HS221-T
BKP2125HS331-T
RoHS
RoHS
RoHS
RoHS
RoHS
33
60
±25％
±25％
±25％
±25％
±25％
100
100
100
100
100
20
25
40
50
75
4.0
3.0
2.5
2.0
1.5
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
100
220
330
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
108
■ ELECTRICAL CHARACTERISTICS
BKP0402
BKP0603
■
■
BKP0402 HM100
BKP0603 HS100
BKP0603 HS220
BKP0603 HS330
50
40
30
20
10
20
15
10
100
80
100
80
60
60
40
40
5
0
20
0
20
0
0
1
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
10
100
1000
10000
10000
10000
BKP0603 HS800
BKP0603 HS121
BKP0603 HM100
BKP0603 HM220
150
100
50
200
150
100
30
60
25
20
15
10
50
40
30
20
50
0
5
0
10
0
0
1
10
100
1000
1000
1000
1
10
100
1000
1000
1000
10000
10000
10000
1
10
100
1000
1000
1000
1000
10000
10000
10000
1
10
100
1000
1000
1000
1000
1000
10000
10000
10000
10000
10000
BKP0603 HM330
BKP0603 HM800
BKP0603 HM121
BKP0603 TS220
70
60
50
40
30
20
10
20
15
10
250
200
150
100
35
30
25
20
15
10
5
5
0
50
0
0
1
0
10
100
1
100
1
10
100
1
10
10
10
100
BKP1005
■
／
BKP0603 TS330
BKP0603 TM220
BKP0603 TM330
BKP1005 EM100
45
40
35
30
25
20
15
10
50
45
40
35
30
25
20
15
10
5
70
60
50
40
30
20
10
0
20
15
10
5
5
0
0
1
0
1
10
100
10000
1
10
100
1
10
100
100
BKP1005 EM300
BKP1005 EM600
BKP1005 EM121
BKP1005 EM221
400
350
300
250
200
150
100
50
100
80
60
40
20
150
100
250
200
150
100
50
0
50
0
0
1
0
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
10000
100
BKP1005 HS100
BKP1005 HS330
BKP1005 HS680
BKP1005 EM331
100
80
100
80
250
200
150
100
50
250
200
150
100
50
60
60
40
40
20
0
20
0
0
1
0
1
1
10
100
1000
10000
1
10
100
1000
10000
10
100
10
100
1000
10000
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
109
■ ELECTRICAL CHARACTERISTICS
BKP1005 HS121
BKP1005 HS221
BKP1005 HM121
BKP1005 HM221
250
200
150
100
500
250
200
150
100
500
400
300
200
400
300
200
50
0
100
0
50
0
100
0
1
10
10
10
100
1000
1000
1000
10000
10000
10000
1
1
1
10
100
1000
1000
1000
10000
10000
10000
1
10
100
1000
10000
1
1
1
1
10
10
10
100
1000
1000
1000
10000
10000
10000
10000
BKP1005 TS330
BKP1005 TS680
BKP1005 TS121
BKP1005 TM121
100
80
250
200
150
100
250
200
150
100
500
400
300
200
60
40
20
0
50
0
50
0
100
0
1
100
10
100
1
10
100
1000
10000
100
BKP1608
■
BKP1608 HS330
BKP1608 HS600
BKP1608 HS101
BKP1608 HS121
100
80
60
40
20
100
80
250
200
150
100
250
200
150
100
60
40
20
0
50
0
50
0
0
1
100
10
100
100
1
10
100
1000
10000
／
BKP1608 HS181
BKP1608 HS271
BKP1608 HS391
BKP1608 HS471
500
250
0
700
600
500
400
300
200
100
500
400
300
200
500
400
300
200
100
0
100
0
0
1
1
10
100
1000
10000
10
100
1000
10
100
1000
10000
1
10
100
1000
10000
BKP2125
■
BKP2125 HS330
BKP2125 HS600
BKP2125 HS101
BKP2125 HS221
100
100
500
500
50
50
250
250
0
1
0
0
0
10
100
1000
1
10
100
1000
1
10
100
1000
1
10
100
1000
BKP2125 HS331
500
250
0
1
10
100
1000
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
110
Multilayer chip inductors
Multilayer chip inductors for high frequency, Multilayer chip bead inductors
Multilayer common mode choke coils（MC series F type）
■PACKAGING
①Minimum Quantity
●Tape & Reel Packaging
Standard Quantity ［pcs］
Thickness
mm（inch）
Type
CK1608（0603）
CK2125（0805）
Paper Tape
Embossed Tape
－
0.8 （0.031）
0.85（0.033）
1.25（0.049）
0.85（0.033）
1.25（0.049）
0.8 （0.031）
0.9 （0.035）
0.9 （0.035）
0.7 （0.028）
0.9 （0.035）
1.1 （0.043）
0.9 （0.035）
0.9 （0.035）
1.1 （0.043）
0.5 （0.020）
0.8 （0.031）
0.85（0.033）
1.25（0.049）
0.2 （0.008）
0.3 （0.012）
0.5 （0.020）
0.8 （0.031）
0.85（0.033）
1.0 （0.039）
0.2 （0.008）
0.3 （0.012）
0.3 （0.012）
0.3 （0.012）
0.3 （0.012）
0.5 （0.020）
0.2 （0.008）
0.3 （0.012）
0.5 （0.020）
0.3 （0.012）
0.5 （0.020）
0.8 （0.031）
0.85（0.033）
1.25（0.049）
0.45（0.018）
0.8 （0.031）
0.2 （0.008）
0.3 （0.012）
0.5 （0.020）
0.8 （0.031）
0.85（0.033）
0.3 （0.012）
0.4 （0.016）
0.55（0.022）
0.45（0.018）
4000
4000
－
－
2000
－
4000
－
CKS2125（0805）
2000
－
CKP1608（0603）
CKP2012（0805）
CKP2016（0806）
4000
－
3000
3000
3000
3000
2000
3000
3000
2000
－
－
－
CKP2520（1008）
－
－
NM2012（0805）
NM2520（1008）
－
－
－
LK1005（0402）
LK1608（0603）
10000
4000
4000
－
－
－
LK2125（0805）
2000
－
HK0402（01005）
HK0603（0201）
HK1005（0402）
HK1608（0603）
20000
15000
10000
4000
－
－
－
－
4000
3000
40000
－
HK2125（0805）
－
HKQ0402（01005）
HKQ0603W（0201）
HKQ0603C（0201）
HKQ0603S（0201）
HKQ0603U（0201）
AQ105（0402）
20000
15000
15000
15000
15000
10000
20000
15000
10000
15000
10000
4000
4000
－
－
－
－
－
BK0402（01005）
BK0603（0201）
－
－
BK1005（0402）
－
BKH0603（0201）
BKH1005（0402）
BK1608（0603）
－
－
－
－
BK2125（0805）
2000
－
BK2010（0804）
BK3216（1206）
BKP0402（01005）
BKP0603（0201）
BKP1005（0402）
BKP1608（0603）
BKP2125（0805）
MCF0605(0202)
MCF0806(0302)
MCF1210(0504)
MCF2010(0804)
4000
－
4000
－
20000
15000
10000
4000
4000
15000
－
－
－
－
－
－
10000
5000
4000
－
－
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_pack_e-E03R01
②Taping material
●Card board carrier tape
CK
1608
1608
2125
2125
1005
1608
2125
0402
0603
1005
1608
0402
0603
105
BK
0402
0603
1005
1608
2125
2010
0402
0603
1005
1608
2125
0603
1005
0605
Top tape
BK
CKP
CK
BK
BK
CKS
LK
BK
BK
LK
Base tape
BKP
BKP
BKP
BKP
BKP
BKH
BKH
MCF
LK
HK
HK
HK
Sprocket hole
Chip cavity
HK
HKQ
HKQ
AQ
Bottom tape
Chip Filled
Chip
●Embossed Tape
Top tape
CK
2125
2125
2012
2016
2520
2012
2520
2125
0402
2125
BK
2125
3216
0806
1210
2010
CKS
CKP
CKP
CKP
NM
BK
MCF
MCF
MCF
NM
LK
HKQ
HK
Sprocket hole
Chip cavity
Base tape
Chip Filled
Chip
③Taping Dimensions
●Paper tape (8mm wide)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_pack_e-E03R01
Chip cavity
Insertion Pitch
Ｆ
Tape Thickness
Ｔ
Thickness
mm（inch）
Type
Ａ
Ｂ
1.0±0.2
1.8±0.2
4.0±0.1
1.1max
CK1608（0603）
CK2125（0805）
CKS2125（0805）
CKP1608（0603）
LK1005（0402）
LK1608（0603）
LK2125（0805）
HK0402（01005）
HK0603（0201）
HK1005（0402）
HK1608（0603）
HKQ0402（01005）
HKQ0603W（0201）
HKQ0603C（0201）
HKQ0603S（0201）
HKQ0603U（0201）
AQ105（0402）
0.8 （0.031）
0.85（0.033）
0.85（0.033）
0.8 （0.031）
0.5 （0.020）
0.8 （0.031）
0.85（0.033）
0.2 （0.008）
0.3 （0.012）
0.5 （0.020）
0.8 （0.031）
0.2 （0.008）
0.3 （0.012）
0.3 （0.012）
0.3 （0.012）
0.3 （0.012）
0.5 （0.020）
0.2 （0.008）
0.3 （0.012）
0.5 （0.020）
0.8 （0.031）
0.85（0.033）
0.45（0.018）
0.2 （0.008）
0.3 （0.012）
0.5 （0.020）
0.8 （0.031）
0.85（0.033）
0.3 （0.012）
0.5 （0.020）
0.3 （0.012）
（0.039±0.008）
1.5±0.2
（0.071±0.008）
2.3±0.2
（0.157±0.004）
4.0±0.1
（0.043max）
1.1max
（0.059±0.008）
1.5±0.2
（0.091±0.008）
2.3±0.2
（0.157±0.004）
4.0±0.1
（0.043max）
1.1max
（0.059±0.008）
1.0±0.2
（0.091±0.008）
1.8±0.2
（0.157±0.004）
4.0±0.1
（0.043max）
1.1max
（0.039±0.008）
0.65±0.1
（0.071±0.008）
1.15±0.1
（0.157±0.004）
2.0±0.05
（0.043max）
0.8max
（0.026±0.004）
1.0±0.2
（0.045±0.004）
1.8±0.2
（0.079±0.002）
4.0±0.1
（0.031max）
1.1max
（0.039±0.008）
1.5±0.2
（0.071±0.008）
2.3±0.2
（0.157±0.004）
4.0±0.1
（0.043max）
1.1max
（0.059±0.008）
0.25±0.04
（0.091±0.008）
0.45±0.04
（0.157±0.004）
2.0±0.05
（0.043max）
0.36max
（0.010±0.002）
0.40±0.06
（0.018±0.002）
0.70±0.06
（0.079±0.002）
2.0±0.05
（0.014max）
0.45max
（0.016±0.002）
0.65±0.1
（0.028±0.002）
1.15±0.1
（0.079±0.002）
2.0±0.05
（0.018max）
0.8max
（0.026±0.004）
1.0±0.2
（0.045±0.004）
1.8±0.2
（0.079±0.002）
4.0±0.1
（0.031max）
1.1max
（0.039±0.008）
0.25±0.04
（0.071±0.008）
0.45±0.04
（0.157±0.004）
2.0±0.05
（0.043max）
0.36max
（0.010±0.002）
0.40±0.06
（0.018±0.002）
0.70±0.06
（0.079±0.002）
2.0±0.05
（0.014max）
0.45max
（0.016±0.002）
0.40±0.06
（0.028±0.002）
0.70±0.06
（0.079±0.002）
2.0±0.05
（0.018max）
0.45max
（0.016±0.002）
0.40±0.06
（0.028±0.002）
0.70±0.06
（0.079±0.002）
2.0±0.05
（0.018max）
0.45max
（0.016±0.002）
0.40±0.06
（0.028±0.002）
0.70±0.06
（0.079±0.002）
2.0±0.05
（0.018max）
0.45max
（0.016±0.002）
0.75±0.1
（0.028±0.002）
1.15±0.1
（0.079±0.002）
2.0±0.05
（0.018max）
0.8max
（0.030±0.004）
0.25±0.04
（0.045±0.004）
0.45±0.04
（0.079±0.002）
2.0±0.05
（0.031max）
0.36max
BK0402（01005）
BK0603（0201）
BK1005（0402）
BK1608（0603）
BK2125（0805）
BK2010（0804）
BKP0402（01005）
BKP0603（0201）
BKP1005（0402）
BKP1608（0603）
BKP2125（0805）
BKH0603（0201）
BKH1005（0402）
MCF0605(0202)
（0.010±0.002）
0.40±0.06
（0.018±0.002）
0.70±0.06
（0.079±0.002）
2.0±0.05
（0.014max）
0.45max
（0.016±0.002）
0.65±0.1
（0.028±0.002）
1.15±0.1
（0.079±0.002）
2.0±0.05
（0.018max）
0.8max
（0.026±0.004）
1.0±0.2
（0.045±0.004）
1.8±0.2
（0.079±0.002）
4.0±0.1
（0.031max）
1.1max
（0.039±0.008）
1.5±0.2
（0.071±0.008）
2.3±0.2
（0.157±0.004）
4.0±0.1
（0.043max）
1.1max
（0.059±0.008）
1.2±0.1
（0.091±0.008）
2.17±0.1
（0.157±0.004）
4.0±0.1
（0.043max）
0.8max
（0.047±0.004）
0.25±0.04
（0.085±0.004）
0.45±0.04
（0.157±0.004）
2.0±0.05
（0.031max）
0.36max
（0.010±0.002）
0.40±0.06
（0.018±0.002）
0.70±0.06
（0.079±0.002）
2.0±0.05
（0.014max）
0.45max
（0.016±0.002）
0.65±0.1
（0.028±0.002）
1.15±0.1
（0.079±0.002）
2.0±0.05
（0.018max）
0.8max
（0.026±0.004）
1.0±0.2
（0.045±0.004）
1.8±0.2
（0.079±0.002）
4.0±0.1
（0.031max）
1.1max
（0.039±0.008）
1.5±0.2
（0.071±0.008）
2.3±0.2
（0.157±0.004）
4.0±0.1
（0.043max）
1.1max
（0.059±0.008）
0.40±0.06
（0.091±0.008）
0.70±0.06
（0.157±0.004）
2.0±0.05
（0.043max）
0.45max
（0.016±0.002）
0.65±0.1
（0.028±0.002）
1.15±0.1
（0.079±0.002）
2.0±0.05
（0.018max）
0.8max
（0.026±0.004）
0.62±0.03
（0.045±0.004）
0.77±0.03
（0.079±0.002）
2.0±0.05
（0.031max）
0.45max
（0.024±0.001）
（0.030±0.001）
（0.079±0.002）
（0.018max）
Unit : mm（inch）
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_pack_e-E03R01
●Embossed Tape (8mm wide)
Chip cavity
Insertion Pitch
Ｆ
Tape Thickness
Thickness
mm（inch）
Type
Ａ
Ｂ
K
T
1.5±0.2
2.3±0.2
4.0±0.1
2.0
（0.079）
2.0
0.3
CK2125（0805）
CKS2125（0805）
CKP2012（0805）
CKP2016（0806）
1.25（0.049）
1.25（0.049）
0.9 （0.035）
0.9 （0.035）
0.7 （0.028）
0.9 （0.035）
1.1 （0.043）
0.9 （0.035）
0.9 （0.035）
1.1 （0.043）
1.25（0.049）
0.85（0.033）
1.0 （0.039）
1.25（0.049）
0.8（0.031）
（0.059±0.008）
1.5±0.2
（0.091±0.008）
2.3±0.2
（0.157±0.004）
4.0±0.1
（0.012）
0.3
（0.059±0.008）
1.55±0.2
（0.091±0.008）
2.3±0.2
（0.157±0.004）
4.0±0.1
（0.079）
1.3
（0.012）
0.3
（0.061±0.008）
1.8±0.1
（0.091±0.008）
2.2±0.1
（0.157±0.004）
4.0±0.1
（0.051）
1.3
（0.012）
0.25
（0.071±0.004）
（0.087±0.004）
（0.157±0.004）
（0.051）
1.4
（0.01）
（0.055）
1.4
2.3±0.1
2.8±0.1
4.0±0.1
0.3
CKP2520（1008）
（0.091±0.004）
（0.110±0.004）
（0.157±0.004）
（0.055）
1.7
（0.012）
（0.067）
1.3
1.55±0.2
2.3±0.2
4.0±0.1
0.3
NM2012（0805）
NM2520（1008）
LK2125（0805）
HK2125（0805）
（0.061±0.008）
（0.091±0.008）
（0.157±0.004）
（0.051）
1.4
（0.012）
（0.055）
1.7
2.3±0.1
2.8±0.1
4.0±0.1
0.3
（0.091±0.004）
（0.110±0.004）
（0.157±0.004）
（0.012）
（0.067）
2.0
1.5±0.2
2.3±0.2
4.0±0.1
0.3
（0.059±0.008）
（0.091±0.008）
（0.157±0.004）
（0.079）
1.5
（0.012）
（0.059）
2.0
1.5±0.2
2.3±0.2
4.0±0.1
0.3
（0.059±0.008）
（0.091±0.008）
（0.157±0.004）
（0.012）
（0.079）
2.0
1.5±0.2
（0.059±0.008）
1.9±0.1
2.3±0.2
（0.091±0.008）
3.5±0.1
4.0±0.1
（0.157±0.004）
4.0±0.1
0.3
（0.012）
0.3
BK2125（0805）
BK3216（1206）
MCF0806(0302)
MCF1210(0504)
MCF2010(0804)
（0.079）
1.4
（0.075±0.004）
0.75±0.05
（0.138±0.004）
0.95±0.05
（0.157±0.004）
2.0±0.05
（0.055）
0.55
（0.012）
0.3
0.4 （0.016）
0.55（0.022）
0.45（0.018）
（0.030±0.002）
1.15±0.05
（0.037±0.002）
1.40±0.05
（0.079±0.002）
4.0±0.1
（0.022）
0.65
（0.012）
0.3
（0.045±0.002）
1.1±0.1
（0.055±0.002）
2.3±0.1
（0.157±0.004）
4.0±0.1
（0.026）
0.85
（0.012）
0.3
（0.043±0.004）
（0.091±0.004）
（0.157±0.004）
（0.033）
（0.012）
Unit : mm（inch）
●Embossed Tape (4mm wide)
Chip cavity
Insertion Pitch
Tape Thickness
Thickness
mm（inch）
0.2 （0.008）
Type
Ａ
Ｂ
Ｆ
K
T
HKQ0402(01005)
0.23
0.43
1.0±0.02
0.5max.
0.25max.
Unit : mm
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_pack_e-E03R01
④LEADER AND BLANK PORTION
Blank portion
Chip cavity
Blank portion
Leader
100mm or more
(3.94inches or more)
160mm or more
(6.3inches or more)
400mm or more
(15.7inches or more)
Direction of tape feed
⑤Reel Size
t
E
C
B
A
R
D
W
A
B
C
φ13.0±0.2
D
E
R
φ178±2.0
φ50 or more
φ21.0±0.8
2.0±0.5
1.0
t
W
4mm width tape
8mm width tape
1.5max.
2.5max.
5±1.0
10±1.5
(Unit : mm)
⑥Top tape strength
The top tape requires a peel-off force of 0.1～0.7N in the direction of the arrow as illustrated below.
Pull direction
0～15°
Top tape
Base tape
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_pack_e-E03R01
Multilayer chip inductors
Multilayer chip inductors for high frequency, Multilayer chip bead inductors
Multilayer common mode choke coils（MC series F type）
■RELIABILITY DATA
1. Operating Temperature Range
BK0402
BK0603
BK1005
BKH0603
BKH1005
BK1608
BK2125
－55～＋125℃
BK2010
BK3216
ARRAY
BKP0402
BKP0603
BKP1005
BKP1608
BKP2125
MCF 0605
MCF 0806
MCF 1210
MCF 2010
CK1608
－55～＋85℃
－40～＋85℃
Specified Value
CK2125
CKS2125
CKP1608
CKP2012
CKP2016
CKP2520
NM2012
－40～＋85℃
NM2520
LK1005
LK1608
LK2125
HK0402/HKQ0402
HK0603
－55～＋125℃
－40～＋85℃
－55～＋125℃
HK1005
HK1608
HK2125
HKQ0603W/HKQ0603C/HKQ0603S/
HKQ0603U/
AQ105
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-E03R01
2. Storage Temperature Range
BK0402
BK0603
BK1005
BKH0603
BKH1005
BK1608
BK2125
－55～＋125℃
BK2010
BK3216
ARRAY
BKP0402
BKP0603
BKP1005
BKP1608
BKP2125
MCF 0605
MCF 0806
MCF 1210
MCF 2010
－55～＋85℃
－40～＋85℃
CK1608
Specified Value
CK2125
CKS2125
CKP1608
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
－40～＋85℃
LK1608
LK2125
HK0402/HKQ0402
HK0603
HK1005
HK1608
HK2125
－55～＋125℃
－40～＋85℃
－55～＋125℃
HKQ0603W/HKQ0603C/HKQ0603S/
HKQ0603U/
AQ105
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-E03R01
3. Rated Current
BK0402
BK0603
BK1005
BKH0603
BKH1005
BK1608
BK2125
150～750mA DC
100～500mA DC
120～1000mA DC
115～160mA DC
200～300mA DC
150～1500mA DC
200～1200mA DC
100mA DC
BK2010
BK3216
ARRAY
100～200mA DC
1.1A DC
BKP0402
BKP0603
BKP1005
BKP1608
BKP2125
MCF 0605
MCF 0806
MCF 1210
MCF 2010
CK1608
0.8～1.8A DC
0.8～2.4A DC
1.0～3.0A DC
1.5～4.0A DC
0.05A DC
0.1～0.13A DC
0.1～0.15A DC
0.1A DC
50～60mA DC
CK2125
60～500mA DC
110～280mA DC
0.35～0.9A DC
0.7～1.2A DC
Specified Value
CKS2125
CKP1608
CKP2012
CKP2016
CKP2520
NM2012
0.9～1.6A DC
1.1～1.8A DC
1.0～1.2A DC
NM2520
0.9～1.2A DC
LK1005
20～25mA DC
LK1608
1～150mA DC
LK2125
5～300mA DC
HK0402
160～380mA DC
60～470mA DC
110～300mA DC (-55～+125℃） 200～900mA DC (-55～+85℃)
150～300mA DC
300mA DC
HK0603
HK1005
HK1608
HK2125
HKQ0402
HKQ0603W
HKQ0603C
HKQ0603S
HKQ0603U
AQ105
100～500mA DC
100～850mA DC
160～850mA DC
130～600mA DC
190～900mA DC
280～710mA DC
Definition of rated current：
・In the CK, CKS and BK Series, the rated current is the value of current at which the temperature of the element is increased within 20℃.
・In the BK Series P type and CK Series P type, NM Series the rated current is the value of current at which the temperature of the element is increased within
40℃.
・In the LK, HK, HKQ0603, and AQ Series, the rated current is either the DC value at which the internal L value is decreased within 5% with the application of DC
bias, or the value of current at which the temperature of the element is increased within 20℃.
・In the HKQ0402(～9N1), the rated current is either the DC value at which the internal L value is decreased within 5% with the application of DC bias, or the
value of current at which the temperature of the element is increased within 20℃.
・In the HKQ0402(10N～), the rated current is either the DC value at which the internal L value is decreased within 5% with the application of DC bias, or the
value of current at which the temperature of the element is increased within 25℃.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-E03R01
4. Impedance
BK0402
BK0603
BK1005
BKH0603
BKH1005
BK1608
BK2125
10～180Ω ±5Ω(10Ω), ±25%(Other)
10～600Ω ±25%
10～1800Ω ±25%
600～1500Ω ±25%
600～1800Ω ±25%
22～2500Ω ±25%
15～2500Ω ±25%
BK2010
BK3216
5～1000Ω ±25%
ARRAY
60～1000Ω ±25%
BKP0402
BKP0603
BKP1005
BKP1608
BKP2125
MCF 0605
MCF 0806
MCF 1210
MCF 2010
CK1608
10 ±5Ω
10～120Ω ±5Ω(10Ω), ±25%(Other)
10～330Ω ±5Ω(EM100), ±25%(Other)
33～470Ω ±25%
33～330Ω ±25%
12～90Ω ±5Ω(12Ω), ±20%(35Ω), ±25%(Other)
12～90Ω ±5Ω(12Ω), ±20%(Other)
40～90Ω ±20%（2H900）,±25%（Other）
90Ω ±25%
Specified Value
CK2125
CKS2125
CKP1608
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
－
LK1608
LK2125
HK0402/HKQ0402
HK0603
HK1005
HK1608
HK2125
HKQ0603W/HKQ0603C/HKQ0603S/
HKQ0603U
AQ105
BK0402Series, BKP0402Series
Measuring frequency
Measuring equipment
Measuring jig
: 100±1MHz
: E4991A（or its equivalent）
: 16197A（or its equivalent）
BK0603Series, BKP0603Series
Measuring frequency
Measuring equipment
Measuring jig
: 100±1MHz
: 4291A（or its equivalent）
: 16193A（or its equivalent）
BK1005Series, BKP1005Series ,BKH1005Series
Test Methods and
Remarks
Measuring frequency
Measuring equipment
Measuring jig
: 100±1MHz
: 4291A（or its equivalent）
: 16192A（or its equivalent）, 16193A（or its equivalent）
BK1608・2125Series, BKP1608・2125Series
Measuring frequency
Measuring equipment
Measuring jig
: 100±1MHz
: 4291A（or its equivalent）, 4195A（or its equivalent）
: 16092A（or its equivalent） or 16192A（or its equivalent）/HW
BK2010・3216Series, MCFSeries
Measuring frequency
Measuring equipment
Measuring jig
: 100±1MHz
: 4291A（or its equivalent）, 4195A（or its equivalent）
: 16192A（or its equivalent）
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-E03R01
5. Inductance
BK0402
BK0603
BK1005
BKH0603
BKH1005
BK1608
BK2125
BK2010
BK3216
ARRAY
－
BKP0402
BKP0603
BKP1005
BKP1608
BKP2125
MCF 0605
MCF 0806
MCF 1210
MCF 2010
CK1608
4.7～10.0μH： ±20%
0.1～10.0μH： ±20%
1.0～10.0μH： ±20%
0.33～2.2μH： ±20%
0.47～4.7μH： ±20%
0.47～4.7μH： ±20%
0.47～4.7μH： ±20%
0.82～1.0μH： ±20%
1.0～2.2μH： ±20%
0.12～2.2μH： ±10 or 20%
CK2125
CKS2125
CKP1608
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
Specified Value
LK1608
0.047～33.0μH： ±20% 0.10～12.0μH： ±10%
0.047～33.0μH： ±20% 0.10～12.0μH： ±10%
1.0～5.6nH： ±0.3nH 6.8～12nH： ±5%
LK2125
HK0402
HK0603
1.0～6.2nH： ±0.3nH 6.8～100nH： ±5%
HK1005
1.0～6.2nH： ±0.3nH 6.8～270nH： ±5%
HK1608
1.0～5.6nH： ±0.3nH 6.8～470nH： ±5%
HK2125
1.5～5.6nH： ±0.3nH 6.8～470nH： ±5%
0.5～3.9nH： ±0.1 or 0.2 or 0.3nH 4.3～5.6nH： ±0.3nH or 3% or 5%
6.2～47nH： ±3 or 5%
HKQ0402
0.6～3.9nH： ±0.1 or 0.2 or 0.3nH 4.3～6.2nH： ±0.2 or 0.3nH or 3 or 5%
6.8～27nH： ±3 or 5% 33～100nH： ±5%
HKQ0603W
HKQ0603C
HKQ0603S
HKQ0603U
AQ105
0.6～3.9nH： ±0.1 or 0.2 or 0.3nH 4.3～6.2nH： ±0.2 or 0.3nH 6.8～22nH： ±3 or 5%
0.6～6.2nH： ±0.2 or 0.3nH 6.8～22nH： ±3 or 5%
0.6～4.2nH： ±0.1 or 0.2 or 0.3nH 4.3～6.5nH： ±0.2 or 0.3nH 6.8～22nH： ±3 or 5%
1.0～6.2nH： ±0.3nH 6.8～15nH： ±5%
CK、LK、CKP、NM Series
Measuring frequency
Measuring frequency
Measuring frequency
Measuring frequency
Measuring frequency
Measuring frequency
Measuring frequency
Measuring equipment /jig
: 2～4MHz（CK1608）
: 2～25MHz（CK2125）
: 2～10MHz（CKS2125）
: 10～25MHz（LK1005）
: 1～50MHz（LK1608）
: 0.4～50MHz（LK2125）
: 1MHz（CKP1608・CKP2012・CKP2016・CKP2520・NM2012・NM2520）
:・4194A＋16085B＋16092A（or its equivalent） ・4195A＋41951＋16092A（or its equivalent）
・4294A＋16192A（or its equivalent）
・4291A＋16193A（or its equivalent）/LK1005
・4285A＋42841A＋42842C＋42851－61100（CKP1608･CKP2012・CKP2016・CKP2520・NM2012・NM2520）
Test Methods and Measuring current
Remarks
:・1mA rms（0.047～4.7μH）
・0.1mA rms（5.6～33μH）
HK、HKQ、AQ Series
Measuring frequency
Measuring frequency
Measuring frequency
Measuring frequency
Measuring frequency
Measuring equipment /jig
: 100MHz（HK0402・HK0603・HK1005・AQ105）
: 50/100MHz（HK1608・HK2125）
: 500MHz（HKQ0603C･HKQ0603S・HKQ0603U）
: 300/500MHz（HKQ0603W）
: 100/500MHz（HKQ0402）
:・4291A＋16197A（or its equivalent）/HK0603・AQ105
・4291A＋16193A（or its equivalent）/HK1005
・E4991A＋16197A（or its equivalent）/HKQ0603S・HKQ0603U・HKQ0603W・HKQ0603C
・4291A＋16092A ＋ in-house made jig（or its equivalent）/HK1608・HK2125
・E4991A＋16196D（or its equivalent）/HK0402・HKQ0402
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-E03R01
6. Q
BK0402
BK0603
BK1005
BKH0603
BKH1005
BK1608
BK2125
BK2010
BK3216
ARRAY
－
BKP0402
BKP0603
BKP1005
BKP1608
BKP2125
MCF 0605
MCF 0806
MCF 1210
MCF 2010
CK1608
CK2125
Specified Value
CKS2125
CKP1608
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
－
10～20 min.
10～35 min.
15～50 min.
3 min.
LK1608
LK2125
HK0402
HK0603
4～5 min.
8 min.
HK1005
HK1608
8～12 min.
10～18 min.
3～8 min.
6～15 min.
14～15 min.
10～13 min.
14 min.
HK2125
HKQ0402
HKQ0603W
HKQ0603C
HKQ0603S
HKQ0603U
AQ105
8 min.
LKSeries
Measuring frequency
Measuring frequency
Measuring frequency
: 10～25MHz（LK1005）
: 1～50MHz（LK1608）
: 0.4～50MHz（LK2125）
Measuring equipment /jig :・4194A＋16085B＋16092A（or its equivalent）
・4195A＋41951＋16092A（or its equivalent）
・4294A＋16192A（or its equivalent）
・4291A＋16193A（or its equivalent）/LK1005
Measuring current
・1mA rms（0.047～4.7μH）
・0.1mA rms（5.6～33μH）
Test Methods and
Remarks
HK、HKQ、AQ Series
Measuring frequency
Measuring frequency
Measuring frequency
Measuring frequency
Measuring frequency
: 100MHz（HK0402・HK0603・HK1005・AQ105）
: 50/100MHz（HK1608・HK2125）
: 500MHz（HKQ0603C･HKQ0603S・HKQ0603U）
: 300/500MHz（HKQ0603W）
: 100/500MHz（HKQ0402）
Measuring equipment /jig :・4291A＋16197A（or its equivalent）/HK0603・AQ105
・4291A＋16193A（or its equivalent）/HK1005
・E4991A＋16197A（or its equivalent）/HKQ0603S・HKQ0603U・HKQ0603W・HKQ0603C
・4291A＋16092A ＋ in-house made jig（or its equivalent）/HK1608, HK2125
・E4991A＋16196D（or its equivalent）HK0402・HKQ0402
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-E03R01
7. DC Resistance
BK0402
BK0603
BK1005
BKH0603
BKH1005
BK1608
BK2125
0.07～0.75Ω max.
0.065～1.50Ω max.
0.03～0.90Ω max.
1.50～3.20Ω max.
0.85～2.00Ω max.
0.05～1.10Ω max.
0.05～0.75Ω max.
0.10～0.90Ω max.
0.15～0.80Ω max.
0.07Ω max.
BK2010
BK3216
ARRAY
BKP0402
BKP0603
BKP1005
BKP1608
BKP2125
MCF 0605
MCF 0806
MCF 1210
MCF 2010
CK1608
0.030～0.180Ω max.
0.0273～0.220Ω max.
0.025～0.18Ω max.
0.020～0.075Ω max.
2.5～6.5Ω max
2.5～5.0Ω max.
2.5～4.5Ω max.
4.5Ω max.
0.45～0.85Ω（±30%）
0.16～0.65Ω max.
0.12～0.52Ω max.
0.15～0.35Ω max.
0.08～0.28Ω max.
0.075～0.20Ω max
0.05～0.16Ω max.
0.10～0.15Ω max.
0.11～0.22Ω max.
0.41～1.16Ω max.
0.2～2.2Ω max.
CK2125
CKS2125
CKP1608
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
Specified Value
LK1608
LK2125
0.1～1.1Ω max.
HK0402
0.18～0.99Ω max.
0.11～3.74Ω max.
0.08～4.8Ω max.
0.05～2.6Ω max.
0.10～1.5Ω max.
0.08～5.0Ω max.
0.07～4.1Ω max.
0.07～1.6Ω max.
HK0603
HK1005
HK1608
HK2125
HKQ0402
HKQ0603W
HKQ0603C
HKQ0603S
0.06～1.29Ω max.
HKQ0603U
AQ105
0.06～1.29Ω max.
0.07～0.45Ω max.
Test Methods and
Remarks
Measuring equipment：VOAC-7412, VOAC-7512, VOAC-7521（made by Iwasaki Tsushinki）
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-E03R01
8. Self Resonance Frequency（SRF）
BK0402
BK0603
BK1005
BKH0603
BKH1005
BK1608
BK2125
BK2010
BK3216
ARRAY
－
BKP0402
BKP0603
BKP1005
BKP1608
BKP2125
MCF 0605
MCF 0806
MCF 1210
MCF 2010
CK1608
17～25MHz min.
24～235MHz min.
24～75MHz min.
CK2125
Specified Value
CKS2125
CKP1608
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
LK1608
LK2125
HK0402
HK0603
HK1005
HK1608
HK2125
－
40～180MHz min.
9～260MHz min.
13～320MHz min.
2900～10000MHz min.
900～10000MHz min.
400～10000MHz min.
300～10000MHz min.
200～4000MHz min.
HKQ0402
1200～10000MHz min.
HKQ0603W
HKQ0603C
HKQ0603S
HKQ0603U
AQ105
800～10000MHz min.
2500～10000MHz min.
1900～10000MHz min.
1900～10000MHz min.
2300～10000MHz min.
LK、CK Series :
Measuring equipment
Measuring jig
: 4195A（or its equivalent）
Test Methods and
Remarks
: 41951＋16092A（or its equivalent）
HK、HKQ、AQ Series :
Measuring equipment
: 8719C（or its equivalent）・8753D（or its equivalent）/HK2125
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-E03R01
9. Temperature Characteristic
BK0402
BK0603
BK1005
BKH0603
BKH1005
BK1608
BK2125
BK2010
BK3216
ARRAY
BKP0402
BKP0603
BKP1005
BKP1608
BKP2125
MCF 0605
MCF 0806
MCF 1210
MCF 2010
CK1608
－
CK2125
CKS2125
CKP1608
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
Specified Value
LK1608
LK2125
HK0402
HK0603
HK1005
HK1608
HK2125
HKQ0402
HKQ0603W
HKQ0603C
HKQ0603S
HKQ0603U
AQ105
Inductance change：Within ±10％
HK、HKQ、AQ Series：
Temperature range
Test Methods and
Remarks
: －30～＋85℃
: ＋20℃
Reference temperature
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-E03R01
10. Resistance to Flexure of Substrate
BK0402
BK0603
BK1005
BKH0603
BKH1005
BK1608
BK2125
BK2010
BK3216
ARRAY
BKP0402
BKP0603
BKP1005
BKP1608
BKP2125
MCF 0605
MCF 0806
MCF 1210
MCF 2010
CK1608
CK2125
Specified Value
No mechanical damage.
CKS2125
CKP1608
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
LK1608
LK2125
HK0402
HK0603
HK1005
HK1608
HK2125
HKQ0402
HKQ0603W
HKQ0603C
HKQ0603S
HKQ0603U
AQ105
Warp
: 2mm（BK Series without 0402size、BKP、BKH1005、CK、CKS、CKP、NM、LK、HK、HKQ0603S、HKQ0603U、
AQ Series、MCF1210）
: 1mm（BK0402、BKP0402、BKH0603、HK0402、HKQ0402、HKQ0603W、HKQ0603C Series、MCF Series without 1210
size,）
Testing board
Thickness
: glass epoxy-resin substrate
: 0.8mm
20
Test Methods and
Remarks
R-230
Board
Warp
Deviation±1
45
45
（Unit：mm）
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-E03R01
11. Solderability
BK0402
BK0603
BK1005
BKH0603
BKH1005
BK1608
BK2125
BK2010
BK3216
ARRAY
At least 75％ of terminal electrode is covered by new solder.
BKP0402
BKP0603
BKP1005
BKP1608
BKP2125
MCF 0605
MCF 0806
MCF 1210
MCF 2010
CK1608
CK2125
CKS2125
CKP1608
CKP2012
CKP2016
CKP2520
NM2012
Specified Value
NM2520
LK1005
LK1608
LK2125
At least 75％ of terminal electrode is covered by new solder.
HK0402
HK0603
HK1005
HK1608
HK2125
HKQ0402
HKQ0603W
HKQ0603C
HKQ0603S
HKQ0603U
AQ105
Solder temperature
Solder temperature
Duration
：230±5℃ (JIS Z 3282 H60A or H63A)
Test Methods and
Remarks
：245±3℃ (Sn/3.0Ag/0.5Cu)
：4±1 sec.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-E03R01
12. Resistance to Soldering
BK0402
BK0603
BK1005
BKH0603
BKH1005
BK1608
BK2125
Appearance：No significant abnormality
Impedance change：Within ±30％
BK2010
BK3216
ARRAY
BKP0402
BKP0603
BKP1005
BKP1608
BKP2125
MCF 0605
MCF 0806
MCF 1210
MCF 2010
CK1608
Appearance：No significant abnormality
Impedance change：Within ±20％
No mechanical damage.
CK2125
Remaining terminal electrode：70％ min
CKS2125
CKP1608
Inductance change
CKP2012
Specified Value
R10～4R7： Within ±10％
CKP2016
6R8～100： Within ±15％
CKP2520
NM2012
NM2520
CKS2125 ： Within ±20％
CKP1608、CKP2012、CKP2016、CKP2520、NM2012、NM2520： Within ±30％
No mechanical damage.
LK1005
LK1608
Remaining terminal electrode：70％ min.
Inductance change： Within ±15％
No mechanical damage.
Remaining terminal electrode：70％ min.
Inductance change
LK2125
47N～4R7： Within ±10％
5R6～330： Within ±15％
HK0402
HK0603
HK1005
HK1608
HK2125
No mechanical damage.
HKQ0402
HKQ0603W
HKQ0603C
HKQ0603S
HKQ0603U
AQ105
Remaining terminal electrode：70％ min.
Inductance change： Within ±5％
Solder temperature
Duration
Test Methods and Preheating temperature
：260±5℃
：10±0.5 sec.
：150 to 180℃
：3 min.
Remarks
Preheating time
Flux
：Immersion into methanol solution with colophony for 3 to 5 sec.
Recovery
：2 to 3 hrs of recovery under the standard condition after the test.（See Note 1）
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-E03R01
13. Thermal Shock
BK0402
BK0603
BK1005
BKH0603
BKH1005
BK1608
BK2125
Appearance：No significant abnormality
Impedance change： Within ±30％
BK2010
BK3216
ARRAY
BKP0402
BKP0603
BKP1005
BKP1608
BKP2125
MCF 0605
MCF 0806
MCF 1210
MCF 2010
CK1608
Appearance：No significant abnormality
Impedance change： Within ±20％
No mechanical damage.
Inductance change：Within ±20％ Q change：Within ±30％
Inductance change：Within ±20％ （CKS2125）
CK2125
Specified Value
CKS2125
CKP1608
CKP2012
CKP2016
CKP2520
NM2012
No mechanical damage.
Inductance change： Within ±30％
NM2520
LK1005
No mechanical damage.
LK1608
Inductance change： Within ±10％ Q change： Within ±30％
LK2125
HK0402
HK0603
HK1005
HK1608
HK2125
No mechanical damage.
HKQ0402
HKQ0603W
HKQ0603C
HKQ0603S
HKQ0603U
AQ105
Inductance change： Within ±10％ Q change： Within ±20％
Conditions for 1 cycle
Step
temperature（℃）
time（min.）
1
2
3
4
Minimum operating temperature ＋0/－3
Room temperature
30±3
2～3
Test Methods and
Remarks
Maximum operating temperature ＋3/－0
Room temperature
30±3
2～3
Number of cycles：5
Recovery：2 to 3 hrs of recovery under the standard condition after the test.（See Note 1）
(Note 1) When there are questions concerning measurement result；measurement shall be made after 48±2 hrs of recovery under the standard condition.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-E03R01
14. Damp Heat（ Steady state）
BK0402
BK0603
BK1005
BKH0603
BKH1005
BK1608
BK2125
Appearance：No significant abnormality
Impedance change： Within ±30％
BK2010
BK3216
ARRAY
BKP0402
BKP0603
BKP1005
BKP1608
BKP2125
MCF 0605
MCF 0806
MCF 1210
MCF 2010
CK1608
Appearance：No significant abnormality
Impedance change： Within ±20％
No mechanical damage.
Inductance change： Within ±20％ Q change： Within ±30％
Inductance change： Within ±20％
CK2125
CKS2125
Specified Value
CKP1608
CKP2012
CKP2016
CKP2520
NM2012
NM2520
LK1005
No mechanical damage.
Inductance change： Within ±30％
No mechanical damage.
Inductance change： Within ±10％ Q change： Within ±30％
No mechanical damage.
LK1608
LK2125
Inductance change： Within ±20％ Q change： Within ±30％
HK0402
HK0603
HK1005
HK1608
HK2125
No mechanical damage.
HKQ0402
HKQ0603W
HKQ0603C
HKQ0603S
HKQ0603U
AQ105
Inductance change： Within ±10％ Q change： Within ±20％
BK、BKP、BKH Series、MCF Series：
Temperature ：40±2℃
Humidity
Duration
Recovery
：90 to 95％RH
：500＋24/－0 hrs
：2 to 3 hrs of recovery under the standard condition after the removal from test chamber.（See Note 1）
Test Methods and
Remarks
LK、CK、CKS、CKP、NM、HK、HKQ、AQ Series：
Temperature ：40±2℃（ LK、CK、CKS、CKP、NM Series）
：60±2℃（ HK、HKQ、AQ Series）
Humidity
Duration
Recovery
：90 to 95％RH
：500±12 hrs
：2 to 3 hrs of recovery under the standard condition after the removal from test chamber.（See Note 1）
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-E03R01
15. Loading under Damp Heat
BK0402
BK0603
BK1005
BKH0603
BKH1005
BK1608
BK2125
Appearance：No significant abnormality
Impedance change： Within ±30％
BK2010
BK3216
ARRAY
BKP0402
BKP0603
BKP1005
BKP1608
BKP2125
CK1608
No mechanical damage.
Inductance change： Within ±20％ Q change： Within ±30％
No mechanical damage.
CK2125
CKS2125
Inductance change： Within ±20％
CKP1608
CKP2012
CKP2016
No mechanical damage.
Specified Value
Inductance change： Within ±30％
CKP2520
NM2012
NM2520
No mechanical damage.
LK1005
LK1608
LK2125
Inductance change： Within ±10％ Q change： Within ±30％
No mechanical damage.
Inductance change： 0.047～12.0μH： Within ±10％ 15.0～33.0μH： Within ±15％
Q change： Within ±30％
No mechanical damage.
Inductance change： Within ±20％ Q change： Within ±30％
HK0402
HK0603
HK1005
HK1608
HK2125
No mechanical damage.
HKQ0402
HKQ0603W
HKQ0603C
HKQ0603S
HKQ0603U
AQ105
Inductance change： Within ±10％ Q change： Within ±20％
BK、BKP、BKH Series：
Temperature
Humidity
：40±2℃
：90 to 95％RH
：Rated current
：500＋24/－0 hrs
Applied current
Duration
Recovery
：2 to 3 hrs of recovery under the standard condition after the removal from test chamber.（See Note 1）
Test Methods and
Remarks
LK、CK、CKS、CKP、NK、HK、HKQ、AQ Series：
Temperature
：40±2℃（ LK、CK、CKS、CKP、NM Series）
：60±2℃（ HK、HKQ、AQ Series）
：90 to 95％RH
Humidity
Applied current
Duration
：Rated current
：500±12 hrs
Recovery
：2 to 3 hrs of recovery under the standard condition after the removal from test chamber.（See Note 1）
Note on standard condition: "standard condition" referred to herein is defined as follows:
5 to 35℃ of temperature, 45 to 85% relative humidity, and 86 to 106kPa of air pressure.
When there are questions concerning measurement results:
In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70% relative humidity, and 86 to 106kPa of air
pressure.
Unless otherwise specified, all the tests are conducted under the "standard condition."
(Note 1) Measurement shall be made after 48±2 hrs of recovery under the standard condition.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-E03R01
16. Loading at High Temperature
BK0402
BK0603
BK1005
BKH0603
BKH1005
BK1608
BK2125
Appearance：No significant abnormality
Impedance change： Within ±30％
BK2010
BK3216
ARRAY
BKP0402
BKP0603
BKP1005
BKP1608
BKP2125
MCF 0605
MCF 0806
MCF 1210
MCF 2010
CK1608
Appearance：No significant abnormality
Impedance change： Within ±20％
No mechanical damage.
Inductance change： Within ±20％ Q change： Within ±30％
No mechanical damage.
CK2125
CKS2125
Inductance change： Within ±20％
CKP1608
Specified Value
CKP2012
CKP2016
CKP2520
NM2012
NM2520
No mechanical damage.
Inductance change： Within ±30％
No mechanical damage.
LK1005
LK1608
LK2125
Inductance change： Within ±10％ Q change： Within ±30％
No mechanical damage.
Inductance change： 0.047～12.0μH： Within ±10％ 15.0～33.0μH： Within ±15％
Q change： Within ±30％
No mechanical damage.
Inductance change： Within ±20％ Q change： Within ±30％
HK0402
HK0603
HK1005
HK1608
HK2125
No mechanical damage.
HKQ0402
HKQ0603W
HKQ0603C
HKQ0603S
HKQ0603U
AQ105
Inductance change： Within ±10％ Q change： Within ±20％
BK、BKH、BKP Series、MCF Series：
Temperature : 125±3℃（BK、BKH Series）
: 85±3℃（BKP、MCF Series）
Applied current ：Rated current
Duration
：500＋24/－0 hrs
Recovery
：2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
（See Note 1）
Test Methods and
Remarks
LK、CK、CKS、CKP、NM、HK、HKQ、AQ Series：
Temperature : 85±2℃（LK、CK、CKS、CKP、NM Series）
: 85±2℃（HK1608，2125）
: 85±2℃（HK1005, AQ105 operating temperature range－55～＋85℃）
: 125±2℃（HK0402, HKQ0402, HK0603, HK1005, HKQ0603S, HKQ0603U, HKQ0603W, HKQ0603C, AQ105
operating temperature range－55～＋125℃）
Applied current ：Rated current
Duration
：500±12 hrs
Recovery
：2 to 3 hrs of recovery under the standard condition after the test.（See Note 1）
Note on standard condition: "standard condition" referred to herein is defined as follows:
5 to 35℃ of temperature, 45 to 85% relative humidity, and 86 to 106kPa of air pressure.
When there are questions concerning measurement results:
In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70% relative humidity, and 86 to 106kPa of air
pressure. Unless otherwise specified, all the tests are conducted under the "standard condition."
(Note 1) Measurement shall be made after 48±2 hrs of recovery under the standard condition.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_reli_e-E03R01
Precautions on the use of Multilayer chip inductors
Multilayer chip inductors for high frequency, Multilayer chip bead inductors
Multilayer common mode choke coils（MC series F type）
■PRECAUTIONS
1. Circuit Design
◆Verification of operating environment, electrical rating and performance
1. A malfunction in medical equipment, spacecraft, nuclear reactors, etc. may cause serious harm to human life or have severe social
ramifications.
As such, any inductors to be used in such equipment may require higher safety and/or reliability considerations and should be clearly
Precautions
differentiated from components used in general purpose applications.
◆Operating Current（Verification of Rated current）
1. The operating current for inductors must always be lower than their rated values.
2. Do not apply current in excess of the rated value because the inductance may be reduced due to the magnetic saturation effect.
2. PCB Design
◆Pattern configurations（Design of Land-patterns）
1. When inductors are mounted on a PCB, the size of land patterns and the amount of solder used（size of fillet）can directly affect inductor
performance.
Therefore, the following items must be carefully considered in the design of solder land patterns:
（1） The amount of solder applied can affect the ability of chips to withstand mechanical stresses which may lead to breaking or
cracking. Therefore, when designing land-patterns it is necessary to consider the appropriate size and configuration of the solder
pads which in turn determines the amount of solder necessary to form the fillets.
（2） When more than one part is jointly soldered onto the same land or pad, the pad must be designed so that each component's
Precautions
soldering point is separated by solder-resist.
（3） The larger size of land patterns and amount of solder, the smaller Q value after mounting on PCB. It makes higher the Q value to
design land patterns smaller than terminal electrode of chips.
◆Pattern configurations（Inductor layout on panelized［ breakaway］ PC boards）
1. After inductors have been mounted on the boards, chips can be subjected to mechanical stresses in subsequent manufacturing
processes （PCB cutting, board inspection, mounting of additional parts, assembly into the chassis, wave soldering the reflow soldered
boards etc.）For this reason, planning pattern configurations and the position of SMD inductors should be carefully performed to
minimize stress.
◆Pattern configurations（Design of Land-patterns）
1. The following diagrams and tables show some examples of recommended patterns to prevent excessive solder amounts（larger fillets
which extend above the component end terminations）. Examples of improper pattern designs are also shown.
（1） Recommended land dimensions for a typical chip inductor land patterns for PCBs
Land pattern
Chip inductor
Solder-resist
Chip inductor
C
W
B
A
B
L
Recommended land dimensions for wave-soldering （Unit：mm）
Type
1608
1.6
2012
2.0
2125
2.0
2016
2.0
2520
2.5
3216
L
3.2
Size
W
0.8
1.25
1.25
1.6
2.0
1.6
A
B
C
0.8～1.0
0.5～0.8
0.6～0.8
1.0～1.4
0.8～1.5
0.9～1.2
1.0～1.4
0.8～1.5
0.9～1.2
1.0～1.4
0.8～1.5
1.3～1.6
1.0～1.4
0.6～1.0
1.6～2.0
1.8～2.5
0.8～1.7
1.2～1.6
Technical
considerations
Recommended land dimensions for reflow-soldering （Unit：mm）
Type
0402
0.4
0603
0.6
1005
1.0
105
1.0
0.6
1608
1.6
2012
2.0
L
Size
W
0.2
0.3
0.5
0.8
1.25
A
B
C
0.15～0.25 0.20～0.30
0.10～0.20 0.20～0.30
0.15～0.30 0.25～0.40
0.45～0.55 0.50～0.55
0.40～0.50 0.30～0.40
0.45～0.55 0.60～0.70
0.8～1.0
0.6～0.8
0.6～0.8
0.8～1.2
0.8～1.2
0.9～1.6
Type
2125
2.0
2016
2.0
2520
2.5
3216
3.2
L
Size
W
1.25
1.6
2.0
1.6
A
B
C
0.8～1.2
0.8～1.2
0.9～1.6
0.8～1.2
0.8～1.2
1.2～2.0
1.0～1.4
0.6～1.0
1.8～2.2
1.8～2.5
0.6～1.5
1.2～2.0
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_prec_e-E02R01
Excess solder can affect the ability of chips to withstand mechanical stresses. Therefore, please take proper precautions when
designing land-patterns.
Recommended land dimension for Reflow-soldering
d
c
c
Type
3216
3.2
2010
2.0
1210
1.25
1.0
0806
0.85
0.65
0605
0.65
0.50
L
Size
W
1.6
1.0
0.45～0.55 0.25～0.35 0.27～0.33
0.7～0.8 0.25～0.35 0.17～0.23
a
0.7～0.9 0.5～0.6
0.8～1.0 0.5～0.6
d
b
c
d
0.4～0.5 0.2～0.3 0.25～0.35 0.25～0.35 0.20～0.26
0.8 0.5 0.55 0.5 0.4
（Unit：mm）
（（2） Examples of good and bad solder application
Item
Not recommended
Lead wire of component
Recommended
Solder-resist
Mixed mounting of SMD and
leaded components
Chassis
Solder-resist
Solder (for grounding)
Component placement close to
the chassis
Electrode pattern
Lead wire of component
Soldering iron
Solder-resist
Hand-soldering of leaded
components near mounted
components
Solder-resist
Horizontal component
placement
◆Pattern configurations（Inductor layout on panelized［ breakaway］ PC boards）
1-1. The following are examples of good and bad inductor layout; SMD inductors should be located to minimize any possible mechanical
stresses from board warp or deflection.
Item
Not recommended
Recommended
Position the component at a
right angle to the direction of
the mechanical stresses that
are anticipated.
Deflection of the board
1-2. To layout the inductors for the breakaway PC board, it should be noted that the amount of mechanical stresses given will vary
depending on inductor layout.
An example below should be counted for better design.
E
D
Perforation
C
A
B
Slit
Magnitude of stress A＞B＝C＞D＞E
1-3. When breaking PC boards along their perforations, the amount of mechanical stress on the inductors can vary according to the
method used. The following methods are listed in order from least stressful to most stressful: push-back, slit, V-grooving, and
perforation. Thus, any ideal SMD inductor layout must also consider the PCB splitting procedure.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_prec_e-E02R01
3. Considerations for automatic placement
◆Adjustment of mounting machine
1. Excessive impact load should not be imposed on the inductors when mounting onto the PC boards.
2. The maintenance and inspection of the mounter should be conducted periodically.
◆Selection of Adhesives
Precautions
1. Mounting inductors with adhesives in preliminary assembly, before the soldering stage, may lead to degraded inductor characteristics
unless the following factors are appropriately checked; the size of land patterns, type of adhesive, amount applied, hardening
temperature and hardening period. Therefore, it is imperative to consult the manufacturer of the adhesives on proper usage and
amounts of adhesive to use.
◆Adjustment of mounting machine
1. If the lower limit of the pick-up nozzle is low, too much force may be imposed on the inductors, causing damage. To avoid this, the
following points should be considered before lowering the pick-up nozzle:
（1） The lower limit of the pick-up nozzle should be adjusted to the surface level of the PC board after correcting for deflection of the
board.
（2） The pick-up pressure should be adjusted between 1 and 3N static loads.
（3） To reduce the amount of deflection of the board caused by impact of the pick-up nozzle, supporting pins or back-up pins should be
used under the PC board. The following diagrams show some typical examples of good pick-up nozzle placement:
Item
Improper method
Proper method
chipping
or cracking
Single-sided mounting
supporting pins
or back-up pins
Double-sided mounting
chipping
or cracking
supporting pins
or back-up pins
Technical
2. As the alignment pin wears out, adjustment of the nozzle height can cause chipping or cracking of the inductors because of mechanical
impact on the inductors. To avoid this, the monitoring of the width between the alignment pin in the stopped position, and maintenance,
inspection and replacement of the pin should be conducted periodically.
considerations
◆Selection of Adhesives
1. Some adhesives may cause reduced insulation resistance. The difference between the shrinkage percentage of the adhesive and that of
the inductors may result in stresses on the inductors and lead to cracking. Moreover, too little or too much adhesive applied to the
board may adversely affect component placement, so the following precautions should be noted in the application of adhesives.
（1） Required adhesive characteristics
a. The adhesive should be strong enough to hold parts on the board during the mounting & solder process.
b. The adhesive should have sufficient strength at high temperatures.
c. The adhesive should have good coating and thickness consistency.
d. The adhesive should be used during its prescribed shelf life.
e. The adhesive should harden rapidly.
f. The adhesive must not be contaminated.
g. The adhesive should have excellent insulation characteristics.
h. The adhesive should not be toxic and have no emission of toxic gasses.
（2） When using adhesives to mount inductors on a PCB, inappropriate amounts of adhesive on the board may adversely affect
component placement. Too little adhesive may cause the inductors to fall off the board during the solder process. Too much
adhesive may cause defective soldering due excessive flow of adhesive on to the land or solder pad.
［Recommended conditions］
Amount of adhesives
a
After inductors are bonded
a
Figure
0805 case sizes as examples
a
b
c
0.3mm min
100～120μm
b
Area with no adhesive
c
c
4. Soldering
Precautions
◆Selection of Flux
1. Since flux may have a significant effect on the performance of inductors, it is necessary to verify the following conditions prior to use;
（1） Flux used should be with less than or equal to 0.1 wt% （Chlorine conversion method） of halogenated content. Flux having a strong
acidity content should not be applied.
（2） When soldering inductors on the board, the amount of flux applied should be controlled at the optimum level.
（3） When using water-soluble flux, special care should be taken to properly clean the boards.
◆Soldering
1. Temperature, time, amount of solder, etc. are specified in accordance with the following recommended conditions, and please contact us
about peak temperature when you use lead-free paste.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_prec_e-E02R01
◆Selection of Flux
1-1. When too much halogenated substance（Chlorine, etc.）content is used to activate the flux, or highly acidic flux is used, an excessive
amount of residue after soldering may lead to corrosion of the terminal electrodes or degradation of insulation resistance on the
surface of the Inductor.
1-2. Flux is used to increase solderability in flow soldering, but if too much is applied, a large amount of flux gas may be emitted and may
detrimentally affect solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system.
1-3. Since the residue of water-soluble flux is easily dissolved by water content in the air, the residue on the surface of Inductor in high
humidity conditions may cause a degradation of insulation resistance and therefore affect the reliability of the components. The
cleaning methods and the capability of the machines used should also be considered carefully when selecting water-soluble flux.
◆Soldering
1-1. Preheating when soldering
Heating: Chip inductor components should be preheated to within 100 to 130℃ of the soldering. Cooling: The temperature difference
between the components and cleaning process should not be greater than 100℃.
Chip inductors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling. Therefore, the
soldering process must be conducted with a great care so as to prevent malfunction of the components due to excessive thermal
shock.
Recommended conditions for soldering
［Reflow soldering］
Pb free soldering
Temperature profile
300
300
200
100
Peak
260℃ Max.
Within 10sec.
Preheating
230℃
Within 10sec.
60sec. 60sec
Min.
Min.
200
100
0
Slow
Slow cooling
cooling
Heating above
230℃
40sec. Max.
Preheating150℃
60sec. Min.
0
※Ceramic chip components should be preheated to within 100 to 130℃ of the
soldering.
※Assured to be reflow soldering for 2 times.
Caution
1. The ideal condition is to have solder mass（fillet）controlled to 1/2 to 1/3 of the thickness of the inductor, as shown
below:
1/2T～1/3T
Inductor
Solder
T
Technical
considerations
PC board
2. Because excessive dwell times can detrimentally affect solderability, soldering duration should be kept as close to
recommended times as possible.
［Wave soldering］
Temperature profile
300
200
100
0
300
200
100
0
Peak
260℃ Max.
Within 10sec.
230～250℃
Within 3sec.
Preheating
120sec. Min.
120sec. Min.
Slow
cooling
Slow cooling
Preheating
150℃
※Ceramic chip components should be preheated to within 100 to 130℃ of the
soldering.
※Assured to be wave soldering for 1 time.
※Except for reflow soldering type.
Caution
1. Make sure the inductors are preheated sufficiently.
2. The temperature difference between the inductor and melted solder should not be greater than 100 to 130℃.
3. Cooling after soldering should be as gradual as possible.
4. Wave soldering must not be applied to the inductors designated as for reflow soldering only.
［Hand soldering］
Temperature profile
400
300
200
100
0
400
300
200
100
0
Peak
350℃ Max.
Within 3sec.
230～280℃
Within 3sec.
⊿T
Slow cooling
Slow cooling
Preheating
150℃ Min.
Preheating
60sec. Min.
60sec. Min.
（※⊿Ｔ≦190℃（ 3216Type max）, ⊿Ｔ≦130℃（ 3225 Type min）
※It is recommended to use 20W soldering iron and the tip is 1φ or less.
※The soldering iron should not directly touch the components.
※Assured to be soldering iron for 1 time.
Note: The above profiles are the maximum allowable soldering condition, therefore
these profiles are not always recommended.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_prec_e-E02R01
Caution
1. Use a 20W soldering iron with a maximum tip diameter of 1.0 mm.
2. The soldering iron should not directly touch the inductor.
5. Cleaning
Precautions
◆Cleaning conditions
1. When cleaning the PC board after the Inductors are all mounted, select the appropriate cleaning solution according to the type of flux
used and purpose of the cleaning（e.g. to remove soldering flux or other materials from the production process.）
2. Cleaning conditions should be determined after verifying, through a test run, that the cleaning process does not affect the inductor's
characteristics.
◆Cleaning conditions
1. The use of inappropriate solutions can cause foreign substances such as flux residue to adhere to the inductor, resulting in a degradation
of the inductor's electrical properties（especially insulation resistance）.
2. Inappropriate cleaning conditions（insufficient or excessive cleaning）may detrimentally affect the performance of the inductors.
（1） Excessive cleaning
Technical
a. In the case of ultrasonic cleaning, too much power output can cause excessive vibration of the PC board which may lead to the
cracking of the inductor or the soldered portion, or decrease the terminal electrodes' strength. Thus the following conditions
should be carefully checked;
considerations
Ultrasonic output
Below 20W/ℓ
Below 40kHz
5 min. or less
Ultrasonic frequency
Ultrasonic washing period
6. Post cleaning processes
◆Application of resin coatings, moldings, etc. to the PCB and components.
1. With some type of resins a decomposition gas or chemical reaction vapor may remain inside the resin during the hardening period or while
left under normal storage conditions resulting in the deterioration of the inductor's performance.
2. When a resin's hardening temperature is higher than the inductor's operating temperature, the stresses generated by the excess heat
may lead to inductor damage or destruction.
Precautions
3. Stress caused by a resin's temperature generated expansion and contraction may damage inductors.
The use of such resins, molding materials etc. is not recommended.
7. Handling
◆Breakaway PC boards（splitting along perforations）
1. When splitting the PC board after mounting inductors and other components, care is required so as not to give any stresses of deflection
or twisting to the board.
2. Board separation should not be done manually, but by using the appropriate devices.
◆General handling precautions
1. Always wear static control bands to protect against ESD.
2. Keep the inductors away from all magnets and magnetic objects.
3. Use non-magnetic tweezers when handling inductors.
Precautions
4. Any devices used with the inductors（ soldering irons, measuring instruments） should be properly grounded.
5. Keep bare hands and metal products（i.e., metal desk）away from chip electrodes or conductive areas that lead to chip electrodes.
6. Keep inductors away from items that generate magnetic fields such as speakers or coils.
◆Mechanical considerations
1. Be careful not to subject the inductors to excessive mechanical shocks.
（1） If inductors are dropped on the floor or a hard surface they should not be used.
（2） When handling the mounted boards, be careful that the mounted components do not come in contact with or bump against other
boards or components.
8. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packaging material in good condition, care must be taken to control
temperature and humidity in the storage area. Humidity should especially be kept as low as possible.
Recommended conditions
Precautions
Ambient temperature Below 40℃
Humidity Below 70% RH
The ambient temperature must be kept below 30℃. Even under ideal storage conditions inductor electrode solderability decreases as
time passes, so inductors should be used within 6 months from the time of delivery.
*The packaging material should be kept where no chlorine or sulfur exists in the air.
◆Storage
Technical
1. If the parts are stocked in a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of
terminal electrodes and deterioration of taping/packaging materials may take place. For this reason, components should be used within
6 months from the time of delivery. If exceeding the above period, please check solderability before using the inductors.
considerations
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_prec_e-E02R01
CHIP BEAD INDUCTORS FOR POWER LINES (FB SERIES M TYPE)
WAVE
REFLOW
■PARTS NUMBER
*Operating Temp. : -40～+125℃（Including self-generated heat）
△＝Blank space
F
B
△
M
J
3
2
1
6
H
S
8
0
0
－
⑦
T
△
⑨
①
②
③
④
⑤
⑥
⑧
①Series name
⑤Material
Code
HS
Code
FB
Series name
Ferrite bead
Material
Refer to impedance curves
for material differences
HM
②Shape
Code
M
HL
Shape
Rectangular chip
⑥Nominal impedance
Code
（example）
330
Nominal impedance［Ω］
③Characteristics
Code
Characteristics
Standard
33
J
111
110
H
High Impedance type
132
1300
④Dimensions（L×W）
Code
⑦Impedance tolerance
Dimensions
（L×W）［mm］
1.6×0.8
Code
－
Impedance tolerance
±25％
Type（inch）
1608
2125
2012
2016
3216
3225
4516
4525
4532
1608（0603）
2125（0805）
2012（0805）
2016（0806）
3216（1206）
3225（1210）
4516（1806）
4525（1810）
4532（1812）
N
±30％
2.0×1.25
⑧Packaging
2.0×1.6
3.2×1.6
3.2×2.5
4.5×1.6
4.5×2.5
4.5×3.2
Code
T
Packaging
Taping
⑨Internal code
Code
△
Internal code
Standard
／
■STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY
Type
A
1.0
1.4
1.4
1.75
1.0
1.4
1.4
1.4
B
C
1.0
1.65
2.0
2.0
1.0
1.65
2.0
2.0
2.9
2.0
Recommended Land Patterns
Surface Mounting
FB MJ1608
FB MJ2125
FB MJ3216
FB MJ4516
FB MH1608
FB MH2012
FB MH2016
FB MH3216
FB MH3225
FB MH4516
FB MH4525
FB MH4532
1.0
1.2
2.2
3.5
1.0
1.2
1.2
2.2
2.2
3.5
3.5
3.5
・Mounting and soldering conditions should be
checked beforehand.
1.4
1.75
1.75
1.75
2.9
3.7
Unit：mm
Standard quantity [pcs]
Paper tape Embossed tape
Type
L
W
T
e
FB MJ1608
（0603）
FB MJ2125
（0805）
FB MJ3216
（1206）
FB MJ4516
（1806）
FB MH1608
（0603）
FB MH2012
（0805）
FB MH2016
（0806）
FB MH3216
（1206）
FB MH3225
（1210）
FB MH4516
（1806）
FB MH4525
（1810）
FB MH4532
（1812）
1.6±0.2
（0.063±0.008）
2.0±0.2
0.8±0.2
（0.031±0.008）
1.25±0.2
0.8±0.2
（0.031±0.008）
0.85±0.2
0.3±0.2
（0.012±0.008）
0.5±0.3
4000
4000
－
－
－
（0.079±0.008）
（0.049±0.008）
（0.033±0.008）
（0.020±0.012）
3.2±0.3
（0.126±0.012）
4.5±0.3
1.6±0.2
（0.063±0.008）
1.6±0.2
1.1±0.2
（0.043±0.008）
1.1±0.2
0.5±0.3
（0.020±0.012）
0.5±0.3
（0.020±0.012）
0.3±0.15
（0.012±0.006）
0.5±0.3
（0.020±0.012）
0.5±0.3
（0.020±0.012）
0.5±0.3
2000
2000
－
－
（0.177±0.012）
（0.063±0.008）
（0.043±0.008）
1.6±0.1
（0.063±0.004）
2.0±0.2
0.8±0.1
（0.031±0.004）
1.25±0.2
0.8±0.1
（0.031±0.004）
0.85±0.2
4000
4000
－
－
（0.079±0.008）
（0.049±0.008）
（0.033±0.008）
2.0±0.2
（0.079±0.008）
3.2±0.3
1.6±0.2
（0.063±0.008）
1.6±0.2
1.6±0.2
（0.063±0.008）
1.6±0.2
2000
2000
1000
2000
1000
－
（0.126±0.012）
（0.063±0.008）
（0.063±0.008）
（0.020±0.012）
3.2±0.3
（0.126±0.012）
4.5±0.3
2.5±0.3
（0.098±0.012）
1.6±0.2
2.5±0.3
（0.098±0.012）
1.6±0.2
0.5±0.3
（0.020±0.012）
0.5±0.3
－
－
（0.177±0.012）
（0.063±0.008）
（0.063±0.008）
（0.020±0.012）
4.5±0.4
（0.177±0.016）
4.5±0.4
2.5±0.3
（0.098±0.012）
3.2±0.3
2.5±0.3
（0.098±0.012）
3.2±0.3
0.9±0.6
（0.035±0.024）
0.9±0.6
－
－
2000
（0.177±0.016）
（0.126±0.012）
（0.126±0.012）
（0.035±0.024）
Unit：mm（inch）
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
111
■PARTS NUMBER
Standard type
●FB MJ1608
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Parts number
EHS
Impedance tolerance
FB MJ1608HS280NT
FB MJ1608HM230NT
RoHS
RoHS
28
23
±30％
±30％
100
100
0.007
0.007
4.0
4.0
0.8 ±0.2
0.8 ±0.2
●FB MJ2125
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MJ2125HS250NT
FB MJ2125HS420-T
FB MJ2125HM210NT
FB MJ2125HM330-T
FB MJ2125HL8R0NT
RoHS
RoHS
RoHS
RoHS
RoHS
25
42
21
33
8
±30％
±25％
±30％
±25％
±30％
100
100
100
100
100
0.004
0.008
0.004
0.008
0.008
6.0
4.0
6.0
4.0
4.0
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
●FB MJ3216
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MJ3216HS480NT
FB MJ3216HS800-T
FB MJ3216HM380NT
FB MJ3216HM600-T
FB MJ3216HL160NT
RoHS
RoHS
RoHS
RoHS
RoHS
48
80
38
60
16
±30％
±25％
±30％
±25％
±30％
100
100
100
100
100
0.005
0.010
0.005
0.010
0.012
6.0
4.0
6.0
4.0
4.0
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
●FB MJ4516
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MJ4516HS720NT
FB MJ4516HS111-T
FB MJ4516HM560NT
FB MJ4516HM900-T
FB MJ4516HL230NT
RoHS
RoHS
RoHS
RoHS
RoHS
72
110
56
±30％
±25％
±30％
±25％
±30％
100
100
100
100
100
0.007
0.014
0.007
0.014
0.014
6.0
4.0
6.0
4.0
3.5
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
90
23
High impedance type
●FB MH1608
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Parts number
EHS
Impedance tolerance
FB MH1608HM470-T
FB MH1608HM600-T
FB MH1608HM101-T
FB MH1608HM151-T
FB MH1608HM221-T
FB MH1608HM331-T
FB MH1608HM471-T
FB MH1608HM601-T
FB MH1608HM102-T
FB MH1608HL300-T
FB MH1608HL600-T
FB MH1608HL121-T
FB MH1608HL221-T
FB MH1608HL331-T
FB MH1608HL471-T
FB MH1608HL601-T
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
47
60
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
0.020
0.025
0.035
0.050
0.070
0.130
0.150
0.170
0.350
0.028
0.045
0.130
0.170
0.210
0.350
0.450
3.5
3.0
2.5
2.1
1.8
1.2
1.0
0.9
0.6
2.6
2.1
1.2
0.9
0.8
0.6
0.5
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
100
150
220
330
470
600
1000
30
／
60
120
220
330
470
600
●FB MH2012
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MH2012HM800-T
FB MH2012HM121-T
FB MH2012HM221-T
FB MH2012HM331-T
RoHS
RoHS
RoHS
RoHS
80
±25％
±25％
±25％
±25％
100
100
100
100
0.025
0.032
0.060
0.080
2.7
2.5
2.0
1.8
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
120
220
330
●FB MH2016
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MH2016HM121NT
FB MH2016HM251NT
RoHS
RoHS
120
250
±30％
±30％
100
100
0.015
0.050
4.5
2.0
1.6 ±0.2
1.6 ±0.2
●FB MH3216
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MH3216HM221NT
FB MH3216HM501NT
RoHS
RoHS
220
500
±30％
±30％
100
100
0.020
0.070
4.0
2.0
1.6 ±0.2
1.6 ±0.2
●FB MH3225
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MH3225HM601NT
FB MH3225HM102NT
FB MH3225HM202NT
RoHS
RoHS
RoHS
600
1000
2000
±30％
±30％
±30％
100
100
100
0.042
0.100
0.130
3.0
2.0
1.2
2.5 ±0.3
2.5 ±0.3
2.5 ±0.3
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
112
■PARTS NUMBER
●FB MH4516
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Parts number
EHS
Impedance tolerance
±30％
FB MH4516HM851NT
RoHS
850
100
0.100
1.5
1.6 ±0.2
●FB MH4525
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MH4525HM102NT
FB MH4525HM162NT
RoHS
RoHS
1000
1600
±30％
±30％
100
100
0.060
0.130
3.0
2.0
2.5 ±0.3
2.5 ±0.3
●FB MH4532
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MH4532HM681-T
FB MH4532HM132-T
FB MH4532HM202-T
RoHS
RoHS
RoHS
680
1300
2000
±25％
±25％
±25％
100
100
100
0.028
0.060
0.130
4.0
3.0
1.3
3.2 ±0.3
3.2 ±0.3
3.2 ±0.3
●High current type
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MJ1608HS220NTR
FB MJ1608HS280NTR
FB MJ1608HM180NTR
FB MJ1608HM230NTR
RoHS
RoHS
RoHS
RoHS
22
28
18
23
±30％
±30％
±30％
±30％
100
100
100
100
0.004
0.006
0.004
0.006
7.5
6.0
7.5
6.0
0.8 ±0.2
0.8 ±0.2
0.8 ±0.2
0.8 ±0.2
／
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
113
■ ELECTRICAL CHARACTERISTICS
FB MJ1608
FB MJ2125
■
■
FB MJ3216
■
FB MJ3216HL160NT
70
60
50
40
30
20
10
0
FB MJ4516
■
／
FB MJ4516HL230NT
100
90
80
70
60
50
40
30
20
10
0
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
114
■ ELECTRICAL CHARACTERISTICS
High impedance type
FB MH1608
■
FB MH1608HM470-T
FB MH1608HM600-T
FB MH1608HM101-T
FB MH1608HM151-T
200
180
160
140
120
100
80
200
180
160
140
120
100
80
200
180
160
140
120
100
80
600
500
400
Z
300
200
100
0
R
Z
Z
Z
60
60
60
R
R
X
R
40
40
40
X
X
X
20
20
20
0
0
0
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
FB MH1608HM221-T
FB MH1608HM331-T
FB MH1608HM471-T
FB MH1608HM601-T
600
500
400
600
500
400
1600
1400
1600
1400
1200
1000
800
1200
1000
800
Z
300
200
100
0
300
200
100
0
Z
R
Z
Z
600
600
R
R
R
X
400
200
400
200
X
X
X
0
0
1
10
100
1000
10000
10000
10000
10000
10000
1
10
100
1000 10000
1
10
100
1000
10000
1
10
100
1000
10000
FB MH1608HM102-T
FB MH1608HL300-T
FB MH1608HL600-T
FB MH1608HL121-T
1600
1400
300
250
200
300
250
200
600
500
400
1200
1000
800
Z
Z
R
Z
R
X
150
100
50
150
100
50
300
200
100
0
R
600
X
Z
R
400
200
X
X
0
0
0
1
10
100
1000
1
10
100
1000 10000
1
10
100
1000 10000
1
10
100
1000 10000
／
FB MH1608HL221-T
FB MH1608HL331-T
FB MH1608HL601-T
FB MH1608HL471-T
1000
900
1400
1200
1000
2500
2000
1500
1000
500
2000
1800
800
700
1600
1400
R
Z
Z
600
500
400
1200
1000
800
800
600
400
200
Z
Z
R
R
R
300
200
100
600
400
200
X
X
X
X
0
0
0
0
1
10
100
1000
1
10
100
1000
10000
10000
1000
1
10
100
1000
10000
10000
1000
1
10
100
1000
10000
FB MH2012
■
FB MH2012HM800-T
FB MH2012HM121-T
FB MH2012HM221-T
FB MH2012HM331-T
400
350
300
250
200
150
400
350
300
250
200
150
400
350
300
250
200
150
800
600
400
200
0
Z
Z
R
R
X
Z
R
Z
100
50
100
50
100
50
X
R
X
X
0
1
0
0
10
100
1000
1
10
100
1000
1
10
100
1000
10000
1
10
100
1000
FB MH2016
FB MH3216
■
■
FB MH2016HM251NT
FB MH3216HM501NT
FB MH2016HM121NT
FB MH3216HM221NT
800
600
400
200
0
800
600
400
200
0
200
180
160
140
120
100
80
350
300
250
200
150
100
50
Z
R
X
Z
Z
R
R
Z
60
R
40
X
20
X
X
0
0
1
10
100
1
10
100
1
10
100
1000
1
10
100
1000
10000
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
115
■ ELECTRICAL CHARACTERISTICS
High impedance type
FB MH3225
FB MH4516
■
■
FB MH3225HM601NT
FB MH3225HM102NT
FB MH3225HM202NT
FB MH4516HM851NT
1200
1000
800
1200
1200
1000
800
2500
2000
1500
1000
500
1000
800
R
R
Z
600
400
200
600
400
200
600
400
200
Z
R
Z
R
Z
X
X
X
X
0
0
0
0
1
1
10
100
1000
1000
1000
1
10
100
1000
1
10
100
1000
10
100
1000
FB MH4525
FB MH4532
■
■
FB MH4525HM102NT
FB MH4525HM162NT
FB MH4532HM681-T
FB M4532HM132-T
1800
1800
1800
1800
1600
1400
1000
1600
1400
1000
1600
1400
1000
1600
1400
1000
1200
800
1200
800
1200
800
1200
800
R
Z
R
Z
R
Z
600
400
600
400
600
400
600
400
Z
R
X
X
X
200
200
0
200
200
X
0
1
0
1
0
1
10
100
1
10
100
1000
10
100
1000
10
100
1000
High current type
■
FB M4532HM202-T
FB J1608HM180NTR
FB MJ1608HS220NTR
40
35
30
25
20
15
10
5
2500
2000
1500
1000
500
30
25
20
15
10
5
Z
Z
Z
R
R
R
X
X
X
0
1
0
0
1
10
100
1000 10000
10
100
1
10
100
1000 10000
／
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
116
CHIP BEAD INDUCTORS FOR POWER LINES (FB SERIES M TYPE)
■PACKAGING
①Minimum Quantity
Standard Quantity［pcs］
Type
Paper Tape
Embossed Tape
1608（0603）
2125（0805）
2012（0805）
2016（0806）
3216（1206）
3225（1210）
4516（1806）
4525（1810）
4532（1812）
4000
4000
4000
－
－
－
－
2000
2000
1000
2000
1000
2000
－
－
－
－
－
②Tape Material
●Card board carrier tape
Top tape
Base tape
Chip Filled
Sprocket hole
Chip cavity
Bottom tape
Chip
●Embossed tape
Top tape
Chip Filled
Sprocket hole
Chip cavity
Base tape
Chip
③Taping Dimensions
●Paper tape (0.315 inches wide)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_pack_e-E02R01
Chip Cavity
Insertion Pitch
F
Tape Thickness
T
Type
A
B
FBMJ1608
FBMH1608
（0603）
1.0±0.2
1.8±0.2
4.0±0.2
1.1max
（0.039±0.008）
（0.071±0.008）
（0.157±0.008）
（0.043max）
FBMJ2125
FBMH2012
（0805）
1.5±0.2
2.3±0.2
4.0±0.2
1.1max
（0.059±0.008）
（0.091±0.008）
（0.157±0.008）
（0.043max）
Unit : mm（inch）
●Embossed tape (0.315 inches wide)
Chip Cavity
Insertion Pitch
F
Tape Thickness
Type
A
B
K
T
FBMH2016
（0806）
1.8±0.2
（0.071±0.008）
1.9±0.2
2.2±0.2
4.0±0.2
2.6max
0.6max
（0.087±0.008）
3.5±0.2
（0.157±0.008）
4.0±0.2
（0.102max）
1.5max
（0.024max）
0.3max
FBMJ3216
（1206）
（0.075±0.008）
1.9±0.2
（0.138±0.008）
3.5±0.2
（0.157±0.008）
4.0±0.2
（0.059max）
2.6max
（0.012max）
0.6max
FBMH3216
（1206）
（0.075±0.008）
2.8±0.2
（0.138±0.008）
3.5±0.2
（0.157±0.008）
4.0±0.2
（0.102max）
4.0max
（0.024max）
0.6max
FBMH3225
（1210）
（0.110±0.008）
（0.138±0.008）
（0.157±0.008）
（0.157max）
（0.024max）
Unit : mm（inch）
●Embossed tape (0.472 inches wide)
Chip Cavity
Insertion Pitch
F
Tape Thickness
Type
A
B
K
T
FBMJ4516
（1806）
1.9±0.2
（0.075±0.008）
1.9±0.2
4.9±0.2
4.0±0.2
1.5max
0.3max
（0.193±0.008）
4.9±0.2
（0.157±0.008）
4.0±0.2
（0.059max）
2.6max
（0.012max）
0.6max
FBMH4516
（1806）
（0.075±0.008）
2.9±0.2
（0.193±0.008）
4.9±0.2
（0.157±0.008）
4.0±0.2
（0.102max）
4.0max
（0.024max）
0.6max
FBMH4525
（1810）
（0.114±0.008）
3.6±0.2
（0.193±0.008）
4.9±0.2
（0.157±0.008）
8.0±0.2
（0.157max）
4.0max
（0.024max）
0.6max
FBMH4532
（1812）
（0.142±0.008）
（0.193±0.008）
（0.315±0.008）
（0.157max）
（0.024max）
Unit : mm（inch）
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_pack_e-E02R01
④Leader and Blank portion
⑤Reel size
2.0±0.5
（0.079±0.020）
t
φ13.0±0.5
（φ0.512±0.020）
φD
φd
φ21.0±0.8
（φ0.827±0.031）
R1.0
W
Type
φD
φd
W
t
FBMJ1608
FBMJ2125
FBMJ3216
10.0±1.5
（0.394±0.059）
14.0±1.5
FBMJ4516
（0.551±0.059）
FBMH1608
FBMH2012
FBMH2016
FBMH3216
FBMH3225
FBMH4516
FBMH4525
180＋0/－3
60＋1/－0
2.5max
（7.09＋0/－0.118 ）
（2.36＋0.039/－0 ）
(0.098max)
10.0±1.5
（0.394±0.059）
14.0±1.5
（0.551±0.059）
14.0±2.0
330±2.0
100±1.0
3.0max
FBMH4532
（12.99±0.080）
（3.94±0.039）
（0.551±0.080）
(1.181max)
Unit : mm（inch）
⑥Top tape strength
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_pack_e-E02R01
CHIP BEAD INDUCTORS FOR POWER LINE (FB SERIES M TYPE)
■RELIABILITY DATA
1. Operating Temperature Range
－40℃～＋125℃
Specified Value
Including self-generated heat
2. Storage Temperature Range
Specified Value
－40℃～＋85℃
Test Methods and
Remarks
*Note: -5 to ＋40℃ in taped packaging
3. Impedance
Specified Value
Within the specified tolerance
Test Methods and Measuring equipment
: Impedance analyzer (HP4291A) or its equivalent
: 100±1 MHz
Remarks
Measuring frequency
4. DC Resistance
Specified Value
Within the specified range
Test Methods and Four-terminal method
Remarks
Measuring equipment : Milliohm High-Tester 3226 (Hioki Denki) or its equivalent
5. Rated Current
Specified Value
Within the specified range
6. Vibration
Appearance
: No significant abnormality
Specified Value
Impedance change
: Within ±30% of the initial value
According to JIS C 0040.
Vibration type
: A
Test Methods and Time
: 2 hrs each in X,Y, and Z directions Total: 6 hrs
: 10 to 55 to 10Hz (/min.)
: 1.5 mm (shall not exceed acceleration 196m/s2)
Remarks
Frequency range
Amplitude
Mounting method
: Soldering onto PC board
7. Solderability
Specified Value
90% or more of immersed surface of terminal electrode shall be covered with fresh solder.
Solder temperature
Test Methods and Immersion time
: 230±5℃
: 4±1 sec.
Remarks
Preconditioning
: Immersion into flux.
: 25mm/sec.
Immersion and Removal speed
8. Resistance to Soldering Heat
Appearance
: No significant abnormality
Specified Value
Impedance change
Preheating
Resistance to Soldering Heat
Test Methods and Duration
: Within ±30% of the initial value
: 150℃ for 3 min.
: 260±5℃
: 10±0.5 sec.
Remarks
Preconditioning
: Immersion into flux.
Immersion and Removal speed
Recovery
: 25mm/sec.
: 2 to 3 hrs of recovery under the standard condition after the test.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_reli_e-E02R01
9. Thermal Shock
Specified Value
Appearance
: No significant abnormality
Impedance change
: Within＋50/－10% of the initial value
According to JIS C 0025.
Conditions for 1 cycle
Step
Temperature (℃)
－40±3℃
Duration (min.)
1
2
3
4
30±3
Within 3
30±3
Room Temperature
85±2℃
Test Methods and
Remarks
Room Temperature
Within 3
Number of cycles
Mounting method
Recovery
: 100
: Soldering onto PC board
: 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
10. Resistance to Humidity (steady state)
Appearances
Specified Value
: No significant abnormality
Impedance change
: Within ±30% of the initial value
Temperature
: 40±2℃
Humidity
Test Methods and
Duration
: 90 to 95% RH
: 500＋24/－0
Remarks
Mounting method
: Soldering onto PC board
Recovery
: 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
11. Loading under Damp Heat
Appearance
Specified Value
No significant abnormality
Impedance change
Within ±30% of the initial value
Temperature
Humidity
: 40±2℃
: 90 to 95%RH
Test Methods and Applied current
: Rated current
Remarks
Duration
: 500＋24/－0 hrs
Mounting method
Recovery
: Soldering onto PC board
: 2 to 3hrs of recovery under the standard condition after the removal from test chamber.
12. High Temperature Loading Test
Appearance
Specified Value
: No significant abnormality
Impedance change
: Within ±30% of the initial value
Temperature
: 85±2℃
Duration
Test Methods and
Applied current
: 500＋24/－0 hrs
: Rated current
Remarks
Mounting method
: Soldering onto PC board
Recovery
: 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
13. Bending Strength
Specified Value
Appearance : No mechanical damage.
Warp : 2mm
Testing board : Glass epoxy-resin substrate
Thickness : 0.8mm
Test Methods and
Remarks
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_reli_e-E02R01
14. Adhesion of Electrode
Specified Value
No separation or indication of separation of electrode.
Applied force
Duration
: 5N
: 10 sec.
Test Methods and
Remarks
Note on standard condition: "standard condition" referred to herein is defined as follows:
5 to 35℃ of temperature, 45 to 85% relative humidity and 86 to 106kPa of air pressure.
When there are questions concerning measurement results:
In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70% relative humidity and 86 to 106kPa of air
pressure. Unless otherwise specified, all the tests are conducted under the "standard condition."
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_reli_e-E02R01
CHIP BEAD INDUCTORS FOR POWER LINE （FB SERIES M TYPE）
■PRECAUTIONS
1. Circuit Design
◆Operating environment
1. The products described in this specification are intended for use in general electronic equipment, (office supply equipment,
telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical
equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear
control systems and medical equipment including life-support systems,) where product failure might result in loss of life, injury or
Precautions
damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
◆Rated current
1. Rated current of this product is shown in this catalogue, but please be sure to have the base board designed with adequate inspection in
case of the generation of heat becomes high within the rated current range when the base board is in high resistance or in bad heating
conditions.
2. PCB Design
◆Land pattern design
Precautions
1. Please refer to a recommended land pattern.
3. Considerations for automatic placement
◆Adjustment of mounting machine
Precautions
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.
2. Mounting and soldering conditions should be checked beforehand.
Technical
◆Adjustment of mounting machine
considerations
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
4. Soldering
◆Wave soldering
1. Please refer to the specifications in the catalog for a wave soldering.
◆Reflow soldering
1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified.
◆Lead free soldering
1. When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering
heat, etc. sufficiently.
Precautions
◆Preheating when soldering
Heating : The temperature difference between soldering and remaining heat should not be greater than 150℃.
Cooling : The temperature difference between the components and cleaning process should not be greater than 100℃.
◆Recommended conditions for using a soldering iron
Put the soldering iron on the land-pattern.
Soldering iron's temperature - Below 350℃
Duration - 3 seconds or less
The soldering iron should not directly touch the inductor.
◆Wave, Reflow, Lead free soldering
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently
degrade the reliability of the products.
【Recommended reflow condition】
Technical
considerations
◆Preheating when soldering
1. There is a case that products get damaged by a heat shock.
◆Recommended conditions for using a soldering iron
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently
degrade the reliability of the products.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_prec_e-E02R01
5. Handling
◆Handling
1. Keep the inductors away from all magnets and magnetic objects.
◆Setting PC boards
1. When setting a chip mounted base board, please make sure that there is no residual stress to the chip by distortion in the board or at
screw part.
Precautions
◆Breakaway PC boards (splitting along perforations)
1. When splitting the PC board after mounting inductors, care should be taken not to give any stresses of deflection or twisting to the
board.
2. Board separation should not be done manually, but by using the appropriate devices.
◆Mechanical considerations
1. Please do not give the inductors any excessive mechanical shocks.
◆Handling
1. There is a case that a characteristic varies with magnetic influence.
◆Setting PC boards
Technical
1. There is a case that a characteristic varies with residual stress.
◆Breakaway PC boards (splitting along perforations)
1. Planning pattern configurations and the position of products should be carefully performed to minimize stress.
◆Mechanical considerations
considerations
1. There is a case to be damaged by a mechanical shock.
6. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the
storage area should be controlled.
・Recommended conditions
Precautions
Ambient temperature 0～40℃
Humidity Below 70% RH
The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may
decrease as time passes.
For this reason, inductors should be used within 6 months from the time of delivery.
◆Storage
Technical
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes
and deterioration of taping/packaging materials may take place.
considerations
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_prec_e-E02R01
LEADED FERRITE BEAD INDUCTORS(FB SERIES A TYPE / R TYPE)
WAVE
■PARTS NUMBER
*Operating Temp. : -25～+85℃（Including self-generated heat）
△＝Blank space
0
F
B
A
0
4
H
A
4
5
0
B
B
－
0
①
②
③
④
⑤
⑥
⑦
①Series name
⑥Lead configuration
Code
FB
Series name
Ferrite bead
Code
AB
BB
KD
Lead configurations［ｍｍ］
Straight lead (26mm lead space) / ammo
Straight lead (52mm lead space) / ammo
Formed lead (10mm pitch) / bulk
Formed lead (12.5mm pitch) / bulk
Formed lead / bulk (15.0mm pitch) / bulk
Lead (2.5mm pitch)/bulk (FBR)
Straight lead / bulk (FBA)
②Shape
Code
A
Shape
KE
Axial lead
Radial lead
KF
R
NA
③Dimensions of core（D）
NB
SA
SB
TB
UB
US
VB
VS
Formed lead (crimped) / bulk
Code
03
Dimensions of core（D）［mm］
Straight lead (FBR05 type) / ammo
Straight lead (FBR07 type) / ammo
Straight lead (FBR07 type) / ammo
Radial lead formed / ammo
φ2.5
φ3.5
5.0
04
05
06
6.0
Formed lead (crimped) / bulk
07
7.5
Dual side lead formed (crimped) / ammo
Formed lead / bulk
④Material
Code
HA
Material
⑦Internal code
Code
Refer to impedance curves
for material differences
Internal code
Standard
VA
－00
⑤Nominal impedance
Code
（example）
850
Nominal impedance［Ω min.］
85
121
120
／
Excluding 03type
■STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
117
Unit：mm（inch）
□Please specify the lead configuration code.
Note: Lead diameter (φd) shall fall within a range of 0.65mm±0.05mm, FBR05, and FBR07 types however, will have a lead diameter (φd) range of
0.6mm±0.05mm.
■PARTS NUMBER
●FBA
Impedance measuring frequency
Rated current
［A］（max.）
［MHｚ］
Nominal impedance
［Ω］（min.）
DC Resistance
［Ω］（max.）
Rated current
［MΩ］（min.）
Parts number
EHS
Material
Material
HA
50
50
50
50
VA
100
100
100
100
HA
7.0
7.0
7.0
7.0
VA
7.0
7.0
7.0
7.0
FBA03△450[]-00
FBA04△450[]-00
FBA04△600[]-00
FBA04△900[]-00
RoHS
RoHS
RoHS
RoHS
35.0
45.0
60.0
90.0
0.01
0.01
0.01
0.01
1.0
1.0
1.0
1.0
●FBR
Impedance measuring frequency
Rated current
［MHｚ］
［A］（max.）
Nominal impedance
［Ω］（min.）
DC Resistance
［Ω］（max.）
Rated current
［MΩ］（min.）
Parts number
EHS
Material
Material
HA
-
VA
100
100
100
100
100
HA
-
VA
7.0
7.0
7.0
7.0
7.0
FBR05VA121[]-00
FBR06△850NA-00
FBR06△121NA-00
FBR07△850[]-00
FBR07△121[]-00
RoHS
RoHS
RoHS
RoHS
RoHS
120.0
85.0
0.01
0.01
0.01
0.01
0.01
1.0
1.0
1.0
1.0
1.0
50
50
50
50
7.0
7.0
7.0
7.0
120.0
85.0
120.0
／
※△Please specify material codes (HA,VA) and [] lead configuration code.
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
118
LEADED FERRITE BEAD INDUCTORS
■PACKAGING
①Minimum Quantity
●Axial lead (FBA)
Standard quantity [pcs]
Type
Lead Configuration
Taped
Bulk
Ammo
－
NA, KD, US
KE, KF, VS
AB, BB
1000
500
－
－
FBA03
FBA04
2000
3000
－
UB, VB
－
NA, KD, US
KE, KF, VS
AB, BB
1000
500
－
－
1000
3000
VB, UB
－
●Radial lead (FBR)
Type
Standard quantity [pcs]
Lead Configuration
Taped
Ammo
－
Bulk
NA
SA
NA
NB
SB
1000
－
FBR05
FBR06
FBR07
2000
－
1000
1000
－
－
2000
②Bulk dimensions
Axial lead (FBA)
●NA
Dimensions
L2
Type
FBA03□450
FBA04□450
FBA04□600
FBA04□900
φD
L1
φd
ℓ
2.5±0.2
4.5±0.3
6.5 max.
（0.098±0.008）
3.5±0.2
（0.177±0.012）
4.5±0.3
（0.256 max.）
6.5 max.
（0.138±0.008）
3.5±0.2
（0.177±0.012）
6.0＋0.5/－0
（0.236＋0.020/－0）
9.0±0.5
（0.256 max.）
8.5 max.
0.65±0.05
18 min.
（0.026±0.002）
（0.709 min.）
（0.138±0.008）
3.5±0.2
（0.335 max.）
11.0 max.
（0.433 max.）
（0.138±0.008）
（0.354±0.020）
Unit：mm（inch）
●US
Dimensions
a
Type
FBA03□450
FBA04□450
φD
A
F
φd
2.5±0.2
4.5±0.3
9.0 max.
（0.098±0.008）
3.5±0.2
（0.138±0.008）
（0.177±0.012）
4.5±0.3
（0.177±0.012）
（0.354 max.）
9.0 max.
（0.354 max.）
5.0±1.0
0.65±0.05
（0.197±0.039）
（0.026±0.002）
Unit：mm（inch）
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_FBA_FBR_pack_e-E02R01
●KD/KE/KF
Dimensions
L1
Type
Lead Symbol
φD
F
φd
ℓ
2.5±0.2
10.0±1.0
4.5±0.3
7.0±2.0
FBA03□450
FBA04□450
FBA04□600
FBA03□450
FBA04□450
FBA04□600
FBA04□900
FBA03□450
FBA04□450
FBA04□600
FBA04□900
（0.098±0.008）
3.5±0.2
（0.394±0.039）
10.0±1.0
（0.177±0.012）
4.5±0.3
（0.276±0.079）
7.5±2.0
0.65±0.05
（0.026±0.020）
KD
（0.138±0.008）
3.5±0.2
（0.394±0.039）
10.0±1.0
（0.177±0.012）
6.0＋0.5/－0
（0.236＋0.020/－0）
4.5±0.3
（0.295±0.079）
7.5±2.0
（0.138±0.008）
2.5±0.2
（0.394±0.039）
12.5±1.0
（0.295±0.079）
7.0±2.0
（0.098±0.008）
3.5±0.2
（0.492±0.039）
12.5±1.0
（0.177±0.012）
4.5±0.3
（0.276±0.079）
7.5±2.0
（0.138±0.008）
3.5±0.2
（0.492±0.039）
12.5±1.0
（0.177±0.012）
6.0＋0.5/－0
（0.236＋0.020/－0）
9.0±0.5
（0.295±0.079）
7.5±2.0
0.65±0.05
KE
（0.026±0.020）
（0.138±0.008）
3.5±0.2
（0.492±0.039）
12.5±1.0
（0.295±0.079）
7.5±2.0
（0.138±0.008）
2.5±0.2
（0.492±0.039）
15.0±1.0
（0.354±0.020）
4.5±0.3
（0.295±0.079）
7.0±2.0
（0.098±0.008）
3.5±0.2
（0.591±0.039）
15.0±1.0
（0.177±0.012）
4.5±0.3
（0.276±0.079）
7.5±2.0
（0.138±0.008）
3.5±0.2
（0.591±0.039）
15.0±1.0
（0.177±0.012）
6.0＋0.5/－0
（0.236＋0.020/－0）
9.0±0.5
（0.295±0.079）
7.5±2.0
0.65±0.05
KF
（0.026±0.020）
（0.138±0.008）
3.5±0.2
（0.591±0.039）
15.0±1.0
（0.295±0.079）
7.5±2.0
（0.138±0.008）
（0.591±0.039）
（0.354±0.020）
（0.295±0.079）
Unit：mm（inch）
●VS
※5±1 for 900 type only
Dimensions
Type
FBA03□450
FBA04□450
FBA04□600
FBA04□900
φD
A
a
F
φd
2.5±0.2
（0.098±0.008）
3.5±0.2
4.5±0.3
12.5 max.
5.0±1.0
（0.197±0.039）
5.0±1.0
0.65±0.05
（0.177±0.012）
4.5±0.3
（0.492 max.）
12.5 max.
（0.026±0.002）
0.65±0.05
（0.138±0.008）
3.5±0.2
（0.177±0.012）
6.0＋0.5/－0
（0.236＋0.020/－0）
9.0±0.5
（0.492 max.）
12.5 max.
（0.197±0.039）
5.0±1.0
（0.026±0.002）
0.65±0.05
（0.138±0.008）
3.5±0.2
（0.492 max.）
16.0 max.
（0.197±0.039）
5.0±1.0
（0.026±0.002）
0.65±0.05
（0.138±0.008）
（0.354±0.020）
（0.630 max.）
（0.197±0.039）
（0.026±0.002）
Unit：mm（inch）
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_FBA_FBR_pack_e-E02R01
Radial lead (FBR)
●NA
Dimensions
Type
FBR05VA121
FBR06□850
FBR06□121
D
L1
φd
ℓ
W
F
5.0 max.
9.0 max.
0.65±0.05
10.0＋3/－5
（0.394＋0.118/－0.197）
10.0＋3/－5
2.5 max.
2.5±1.0
（0.197 max.）
6.0±0.5
（0.354 max.）
7.0 max.
（0.026±0.002）
0.65±0.05
（0.098 max.）
3.0±0.5
（0.098±0.039）
2.5±1.0
（0.236±0.020）
6.0±0.5
（0.276 max.）
9.0 max.
（0.026±0.002）
0.65±0.05
（0.394＋0.118/－0.197）
10.0＋3/－5
（0.118±0.020）
3.0±0.5
（0.098±0.039）
2.5±1.0
（0.236±0.020）
（0.354 max.）
（0.026±0.002）
（0.394＋0.118/－0.197）
（0.118±0.020）
（0.098±0.039）
Unit：mm（inch）
●NB
Dimensions
Type
D
L1
φd
ℓ
W
F
7.5±0.5
7.0 max.
0.6±0.05
5.0＋1/－2
2.5 max.
5.0＋1/－0.5
FBR07□850
FBR07□121
（0.295±0.020）
7.5±0.5
（0.276 max.）
9.0 max.
（0.024±0.002）
0.6±0.05
（0.197＋0.039/－0.079）
5.0＋1/－2
（0.098 max.）
2.5 max.
（0.197＋0.039/－0.020）
5.0＋1/－0.5
（0.295±0.020）
（0.354 max.）
（0.024±0.002）
（0.197＋0.039/－0.079）
（0.098 max.）
（0.197＋0.039/－0.020）
Unit：mm（inch）
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_FBA_FBR_pack_e-E02R01
③Taping Dimensions
●AB（a: 26mm）（1.02inch lead space）
Dimensions
a
Minimum insertion
pitch
Type
φD
L
b
|L1-L2|
1.0 max
φd
2.5±0.2
FBA03
4.5±0.3
26.0＋1.5/－0
（1.02＋0.059/－0）
26.0＋1.5/－0
（1.02＋0.059/－0）
26.0＋1.5/－0
（1.02＋0.059/－0）
26.0＋1.5/－0
（1.02＋0.059/－0）
0.8max
0.65±0.05
10.0
（0.098±0.008）
（0.177±0.012）
4.5±0.3
（0.031max）
0.8max
（0.039 max）
1.0 max
（0.026±0.002）
0.65±0.05
（0.394）
10.0
FBA04□450
（0.177±0.012）
6.0＋0.5/－0
（0.236＋0.020/－0）
9.0±0.5
（0.031max）
0.8max
（0.039 max）
1.0 max
（0.026±0.002）
0.65±0.05
（0.394）
10.0
3.5±0.2
FBA04□600
（0.138±0.008）
（0.031max）
0.8max
（0.039 max）
1.0 max
（0.026±0.002）
0.65±0.05
（0.394）
12.5
FBA04□900
（0.354±0.020）
（0.031max）
（0.039 max）
（0.026±0.002）
（0.492）
Unit：mm（inch）
●BB（a: 52mm）（ 2.05inches lead space）
Dimensions
a
Minimum insertion
pitch
Type
φD
L
b
|L1-L2|
1.0 max
φd
2.5±0.2
FBA03
4.5±0.3
52.0＋2/－1
1.2 max
0.65±0.05
10.0
（0.098±0.008）
（0.177±0.012）
4.5±0.3
（2.05＋0.079/－0.039）
52.0＋2/－1
（0.047 max）
1.2max
（0.039 max）
1.0 max
（0.026±0.002）
0.65±0.05
（0.394）
10.0
FBA04□450
（0.177±0.012）
6.0＋0.5/－0
（0.236＋0.020/－0）
9.0±0.5
（2.05＋0.079/－0.039）
52.0＋2/－1
（0.047max）
1.2max
（0.039 max）
1.0 max
（0.026±0.002）
0.65±0.05
（0.394）
10.0
3.5±0.2
FBA04□600
（0.138±0.008）
（2.05＋0.079/－0.039）
52.0＋2/－1
（0.047 max）
1.2max
（0.039 max）
1.0 max
（0.026±0.002）
0.65±0.05
（0.394）
12.5
FBA04□900
（0.354±0.020）
（2.05＋0.079/－0.039）
（0.047 max）
（0.039 max）
（0.026±0.002）
（0.492）
Unit：mm（inch）
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_FBA_FBR_pack_e-E02R01
●SA（F: 2.5mm pitch）（0.098 inches）
Type
Symbol
A
Dimensions
9.0 max.
Symbol
P2
Dimensions
6.35±1.3
Symbol
ℓ
Dimensions
1.0 max.
121:
（0.354 max.）
2.5 max.
（0.250±0.051）
2.5＋1.0/－0.5
（0.098＋0.039/－0.020）
0.0±2.0
（0.039 max.）
4.0±0.3
T
D
F
△h
W
φD0
φd
L
（0.098 max.）
5.0 max.
（0.157±0.012）
0.65±0.05
（0.197 max.）
18.0＋2.0/－0
（0.709＋0.079/－0）
12.7±1.0
（0.0±0.079）
（0.026±0.002）
11.0 max.
18.0＋1.0/－0.5
（0.709＋0.039/－0.020）
12.5 min.
FBR05
H
（0.433 max.）
0.7±0.2
P
W0
W1
W2
t
（0.500±0.039）
（0.492 min.）
（0.028±0.008）
※1
12.7±0.3
9.0＋0.75/－0.5
（0.354＋0.030/－0.020）
P0
P1
Unit： mm（inch）
（0.500±0.012）
5.1±0.7
※2
3.0 max.
（0.201±0.028）
（0.118 max.）
※1 Accumulated error for 20 pitches is ±2mm.
※2 Bonding tape must not protrude from the base tape.
●SB/TB（F: 5mm pitch）（0.197 inches）
Type
Symbol
A
Dimensions
9.0 max.
Symbol
P0
Dimensions
Symbol
W1
Dimensions
9.0＋0.75/－0.5
※1
121:
850:
12.7±0.3
（0.354 max.）
7.0 max.
（0.500±0.012）
3.85±0.8
（0.354＋0.039/－0.020）
※2
3.0 max.
P1
P2
F
W2
ℓ
（0.276 max.）
2.5 max.
（0.152±0.028）
6.35±1.3
（0.118 max.）
1.0 max.
T
D
（0.098 max.）
7.5±0.5
（0.250±0.051）
5.0＋1.0/－0.5
（0.197＋0.039/－0.020）
0.0±2.0
（0.039 max.）
4.0±0.3
FBR07
φD0
φd
L
（0.925±0.020）
18.0＋2.0/－0
（0.709＋0.079/－0）
16.0±0.5
（0.157±0.012）
0.65±0.05
SB:
TB:
△h
W
（0.0±0.079）
（0.02±0.002）
11.0 max.
H
P
18.0＋1.0/－0.5
（0.709＋0.039/－0.020）
12.5 min.
（0.630±0.020）
12.7±1.0
（0.433 max.）
0.7±0.2
W0
t
（0.500±0.039）
（0.492 min.）
（0.028±0.008）
Unit： mm（inch）
※1 Accumulated error for 20 pitches is ±2mm.
※2 Bonding tape must not protrude from the base tape.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_FBA_FBR_pack_e-E02R01
●UB
Type
Symbol
A
Dimensions
4.5±0.3
Symbol
P1
Dimensions
3.85±0.8
Symbol
W2
Dimensions
※2
3.0 max.
（0.118 max.）
1.0 max.
（0.177±0.012）
9.0 max.
（0.152±0.032）
6.35±1.3
A1
P2
F
ℓ
φD0
φd
L
（0.354 max.）
2.7 max.
（0.250±0.051）
5.0±1.0
（0.039 max.）
4.0±0.3
03:
04:
（0.106 max.）
3.7 max.
（0.197±0.039）
0.0±2.0
（0.157±0.012）
0.65±0.05
φD
FBA03□450
FBA04□450
△h
W
（0.146 max.）
20.0＋0.5/－1.0
（0.787＋0.020/－0.039）
12.7±1.0
（0.0±0.079）
18.0＋1.0/－0.5
（0.709＋0.039/－0.020）
12.5 min.
（0.026±0.002）
11.0 max.
H
P
（0.433 max.）
0.7±0.2
W0
W1
t
（0.500±0.039）
（0.492 min.）
（0.028±0.008）
※1
12.7±0.3
9.0＋0.75/－0.5
（0.354＋0.030/－0.020）
P0
Unit： mm（inch）
（0.500±0.012）
※1 Accumulated error for 20 pitches is ±2mm.
※2 Bonding tape must not protrude from the base tape.
●VB 形状
Type
Symbol
A
Dimensions
4.5±0.3
Symbol
P0
Dimensions
Symbol
W2
Dimensions
※2
3.0 max.
※1
450:
600:
900:
12.7±0.3
（0.177±0.012）
6.0＋0.5/－0
（0.236＋0.020/－0）
9.0±0.5
（0.500±0.012）
3.85±0.8
（0.118 max.）
1.0 max.
P1
P2
F
ℓ
φD0
φd
L
（0.152±0.032）
6.35±1.3
（0.039 max.）
4.0±0.3
（0.354±0.020）
12.5 max.
（0.250±0.051）
5.0±1.0
（0.157±0.012）
0.65±0.05
450:
600:
900:
FBA03□450
FBA04□450
FBA04□600
FBA04□900
（0.492 max.）
16.0 max.
（0.197±0.039）
0.0±2.0
（0.026±0.002）
11.0 max.
A1
△h
W
（0.630 max.）
3.7 max.
（0.0±0.079）
（0.433 max.）
0.7±0.2
18.0＋1.0/－0.5
（0.709＋0.039/－0.020）
12.5 min.
φD
H0
t
（0.146 max.）
16.0±0.5
（0.028±0.008）
W0
W1
Unit： mm（inch）
（0.650±0.020）
12.7±1.0
（0.492 min. ）
9.0＋0.75/－0.5
（0.354＋0.030/－0.020）
P
（0.500±0.039）
※1 Accumulated error for 20 pitches is ±2mm.
※2 Bonding tape must not protrude from the base tape.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_FBA_FBR_pack_e-E02R01
AXIAL LEADED INDUCTORS（CAL Type）、
RADIAL LEADED INDUCTORS（LH Type）、
LEADED FERRITE BEAD INDUCTORS（ FB Series A Type／R Type）
■RELIABILITY DATA
1. Operating temperature Range
CAL45 Type
－25～＋ 105℃
Specified Value
LHL□□□
FBA/FBR
－25～＋ 85℃
Test Methods and CAL45 Type
Remarks LHL□□□
: Including self-generated heat
: Including self-generated heat
2. Storage temperature Range
CAL45 Type
LHL□□□
Specified Value
－40～＋ 85℃
FBA/FBR
3. Rated current
Specified Value
CAL45 Type
LHL□□□
FBA/FBR
Within the specified tolerance
CAL45 Type :
The maximum DC value having inductance within 10% and temperature increase within 40℃ by the application of DC bias.
LHL□□□ :
The maximum DC value having inductance decrease within 10% (LHLC08, LHLC10：within 30%) and temperature increase within the
following specified temperature by the application of DC bias.
Test Methods and
Remarks
Reference temperature
: 25℃（LHL08, LHL10, LHL13）
: 30℃（LHL16, LHLP□□）
: 40℃（LHLC08, LHLC10）
FBA/FBR :
No disconnection or appearance abnormality by continuous current application for 30 min. Change after the application shall be
within ±20% of the initial value.
This is not guaranteed for electrical characteristics during current application.
4. Impedance
CAL45 Type
Specified Value
LHL□□□
FBA/FBR
Within the specified tolerance
FBA/FBR :
Test Methods and
Remarks
Measuring equipment
Measuring frequency
: Impedance analyzer (HP4191A) or its equivalent
: Specified frequency
5. Inductance
CAL45 Type
LHL□□□
FBA/FBR
Within the specified tolerance
Specified Value
CAL45 Type :
Measuring equipment
Measuring frequency
LHL□□□ :
: LCR meter (HP4285A + HP42851A or its equivalent)
: Specified frequency
Test Methods and
Remarks
Measuring equipment
: LCR meter (HP4285A＋HP42851A or its equivalent)
: LCR meter (HP4263A) or its equivalent (at 1kHz)
: Specified frequency
Measuring frequency
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_reli_e-E02R01
6. Q
CAL45 Type
LHL□□□
FBA/FBR
Specified Value
Within the specified tolerance
LHL□□□ (except LHLP) :
Measuring equipment
Test Methods and
Remarks
: LCR meter (HP4285A＋HP42851A or its equivalent)
: LCR meter (HP4263A) or its equivalent (at 1kHz)
: Specified frequency
Measuring frequency
7. DC Resistance
Specified Value
CAL45 Type
LHL□□□
FBA/FBR
Within the specified tolerance
Test Methods and
Remarks
Measuring equipment
: DC ohmmeter
8. Self resonance frequency
CAL45 Type
Specified Value
LHL□□□
FBA/FBR
Within the specified tolerance
Test Methods and LHL□□□(except LHLP) :
Remarks Measuring equipment
: (HP4191A, 4192A) its equivalent
9. Temperature characteristic
CAL45 Type
LHL□□□
FBA/FBR
Specified Value
△L/L : Within ±7% (except LHLP16 : Within ±20%)
Change of maximum inductance deviation in step 1 to 5
Temperature (℃)
Step
LHL□□□
1
2
3
4
5
20
Test Methods and
Remarks
Minimum operating temperature
20 (Standard temperature)
Maximum operating temperature
20
10. Tensile strength test
CAL45 Type
LHL□□□
FBA/FBR
Specified Value
No abnormality such as cut lead, or looseness.
CAL45 Type : Apply the stated tensile force progressively in the direction to draw terminal.
force (N)
10
duration (s)
10
LHL□□□ : Apply the stated tensile force progressively in the direction to draw terminal.
Test Methods and
Remarks
Nominal wire diameter tensile φd (mm)
0.3＜φd≦0.5
force (N)
duration (s)
5
0.5＜φd≦0.8
10
25
30±5
0.8＜φd≦1.2
FBA/FBR : The body of a component shall be fixed and a tensile force of 20±1N shall be applied to the lead wire in the
of the component during 10±1 seconds.
axial direction
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_reli_e-E02R01
11. Over current
Specified Value
CAL45 Type
LHL□□□
FBA/FBR
No emission of smoke no firing.
There shall be no scorch or short of wire.
LHLC08, LHLC10 : There shall be no firing.
LHL□□□・CAL45 Type ：
Measuring current
Duration
Test Methods and
Remarks
: Rated current×2
: 5 min.
: one time
Number of measuring
12. Terminal strength : bending
CAL45 Type
Specified Value
LHL□□□
FBA/FBR
No abnormality such as cut lead, or looseness.
CAL45 Type :
Suspend a weight of specified mass at the end of the terminals and incline the body through the angle of 90 degrees and return it to the
initial position. This operation is done over a period of 2-3 sec. Then second bend in the opposite direction shall be made.
Number of bends : Two times.
Nominal wire diameter
tensile
Mass reference
weight
Bending force
0.3＜ φ d≦0.5
0.5＜ φ d≦0.8
2.5
5
0.25
0.50
Test Methods and
Remarks
LHL□□□・FBA/FBR :
Suspend a weight of specified mass at the end of the terminals and incline the body through the angle of 90 degrees and return it to the
initial position. This operation is done over a period of 2-3 sec. Then second bend in the opposite direction shall be made.
Number of bends : Two times.
Nominal wire diameter
tensile
Mass reference
Bending force
weight
0.25
0.5
0.3＜φd≦0.5
0.5＜φd≦0.8
0.8＜φd≦1.2
2.5
5
10
1.0
13. Insulation resistance : between the terminals and body
CAL45 Type
Specified Value
LHL□□□
FBA/FBR
100MΩ min.
LHL□□□ :
Applied voltage
Duration
Test Methods and
Remarks
: 500 VDC
: 60 sec.
14. Insulation resistance : between terminals and core
CAL45 Type
Specified Value
LHL□□□
FBA/FBR
1MΩ min.
FBA/FBR :
Applied voltage
Duration
Test Methods and
Remarks
: 100 VDC
: 60±5 sec.
15. Withstanding : between the terminals and body
CAL45 Type
Specified Value
LHL□□□
FBA/FBR
No abnormality such as insulation damage
LHL□□□ :
According to JIS C5102. 7. 1. 3 (C)
Metal global method
Test Methods and
Remarks
Applied voltage
Duration
: 500 VDC
: 60 sec.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_reli_e-E02R01
16. DC bias characteristic
CAL45 Type
△L/L : Within －10%
Specified Value
LHL□□□
FBA/FBR
Test Methods and
Remarks
CAL45 Type : Measure inductance with application of rated current using LCR meter to compare it with the initial value.
17. Body strength
Specified Value
CAL45 Type
LHL□□□
FBA/FBR
No abnormality as damage.
No abnormality such as cracks on body.
CAL45 Type :
Applied force
Duration
:50N
: 10 sec.
Speed
: Shall attain to specified force in 2 sec.
FBA :
Applied force : 50±3N
Duration : 30±1 sec.
Test Methods and
Remarks
18. Resistance to vibration
CAL45 Type
△L/L : Within ±5%
Appearance : No abnormality
△L/L : Within ±5%
LHL□□□
FBA/FBR
Specified Value
Q change : Within ±30% (LHLP : only △L/L)
Appearance : No abnormality
Impedance change : Within ±20%
CAL45 Type :
Directions
: 2 hrs each in X, Y and Z directions total : 6hrs.
Frequency range
Amplitude
: 10 to 55 to 10Hz (1min.)
: 1.5mm
Mounting method
Recovery
: Soldering onto printed board.
Test Methods and
Remarks
: At least 1hr of recovery under the standard condition after the test, followed by the measurement within 2hrs.
LHL□□□・FBA/FBR :
Directions
: 2 hrs each in X, Y and Z directions total : 6hrs.
: 10 to 55 to 10Hz (1min.)
: 1.5mm
Frequency range
Amplitude
Mounting method
: Soldering onto printed board.
19. Resistance to shock
CAL45 Type
No significant abnormality in appearance
Specified Value
LHL□□□
FBA/FBR
CAL45 Type :
Drop test
Test Methods and
Remarks
Impact material
Height
: concrete or vinyl tile
: 1m
Total number of drops
: 10 times
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_reli_e-E02R01
20. Solderability
Specified Value
CAL45 Type
LHL□□□
FBA/FBR
At least 75％ of terminal electrode is covered by new solder.
At least 75％ of terminal electrode is covered by new solder.
At least 90％ of terminal electrode is covered by new solder.
CAL45 Type :
Solder temperature
Duration
: 230±5℃
: 2±0.5 sec.
LHL□□□ :
Solder temperature
Duration
: 235±5℃
Test Methods and
Remarks
: 2±0.5 sec.
Immersion depth
FBA/FBR :
: Up to 1.5mm from bottom of case.
Solder temperature
Duration
: 230±5℃
: 3±1 sec.
Immersion depth
: Up to 1.5mm from terminal root.
21. Resistance to soldering heat
CAL45 Type
△L/L : Within ±5%
No significant abnormality in appearance
Inductance change : Within ±5%
LHL□□□
Specified Value
Q change : Within ±30%(LHLP : only △L/L)
No significant abnormality in appearance
Impedance change : Within ±20%
FBA/FBR
CAL45 Type :
Solder temperature
: 270±5℃
Duration
: 5±0.5 sec. One time
Immersed conditions
Recovery
: Inserted into substrate with t=1.6mm
: At least 1hr of recovery under the standard condition after the test, followed by the measurement within
2hrs.
LHL□□□ :
Solder bath method :
Solder temperature
Duration
: 260±5℃
: 10±1 sec.
: Up to 1.5mm from the bottom of case.
: 350±10℃ (At the tip of soldering iron)
: 5±1 sec.
Manual soldering :
Solder temperature
Duration
Test Methods and
Remarks
: Up to 1.5mm from the bottom of case.
: No excessive pressing shall be applied to terminals.
: 4 to 24hrs of recovery under the standard condition after the test.
Caution
Recovery
FBA/FBR :
Solder bath method:
Condition 1:
Solder temperature
Duration
: 260±5℃
: 10±1 sec.
Immersion depth
Solder temperature
Duration
: Up to 1.5mm from the terminal root.
: 350±5℃
: 3±1 sec.
Condition 2 :
Immersion depth
Recovery
: Up to 1.5mm from the terminal root.
: 3hrs of recovery under the standard condition after the test.
22. Resistance to solvent
CAL45 Type
Please avoid the ultrasonic cleaning of this product.
LHL□□□
FBA/FBR
Specified Value
No significant abnormality in appearance
Impedance change : Within ±20%
FBA/FBR :
Solvent temperature
Duration
: 20～25℃
: 30±5 sec.
: Acetone
Test Methods and
Remarks
Solvent type
Recovery
: 3hrs of recovery under the standard condition after the test.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_reli_e-E02R01
23. Thermal shock
Specified Value
CAL45 Type
LHL□□□
△L/L : Within ±10%
Appearance : No abnormality
Inductance change : Within ±10%
Q change : Within ±30% (LHLP：only △L/L)
Appearance : No abnormality
FBA/FBR
Impedance change : Within ±20%
CAL45 Type：Conditions for 1cycle
Step
Temperature (℃)
－25＋0/－3
Duration (min.)
30±3
1
2
3
4
Room temperature
＋85＋2/－0
Within 3
30±3
Room temperature
Within 3
Number of cycles
Recovery
: 5 cycles
: At least 1hr of recovery under the standard condition after the removal from test chamber, followed by the
measurement within 2hrs.
Test Methods and
Remarks
LHL□□□・FBA/FBR： According to JIS C0025
Conditions for 1 cycle
Step
Temperature (℃)
Minimum operating temperature＋0/－3
Room temperature
Duration (min.)
30±3
1
2
3
4
Within 3
30±3
Minimum operating temperature＋2/－0
Room temperature
Within 3
Number of cycles
Recovery
: 10 cycles 〔LHL□□□〕
: 5 cycles (FBA/ FBR)
: 4 to 24hrs of recovery under the standard condition after the removal from the test chamber. 〔LHL□□□〕
: 3hrs of recovery under the standard condition after the removal from the test chamber. (FBA/ FBR)
24. Damp heat
Specified Value
CAL45 Type
LHL□□□
△L/L : Within ±10%
Appearance：No abnormality
FBA/FBR
Impedance change：Within ±20%
CAL45 Type :
Temperature
Humidity
: 40±2℃
: 90～95%RH
Duration
: 1000 hrs
Test Methods and
Remarks
Recovery
FBA/FBR :
Temperature
Humidity
: At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.
: 60±2℃
: 90～95%RH
: 1000 hrs
Duration
Recovery
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_reli_e-E02R01
25. Loading under damp heat
CAL45 Type
△L/L : Within ±10%
Appearance : No abnormality
Specified Value
LHL□□□
Inductance change : Within ±10%
Q change : Within ±30% (LHLP : only △L/L)
FBA/FBR
CAL45 Type :
Temperature
Humidity
: 40±2℃
: 90～95%RH
: 1000 hrs
Duration
Applied current
Recovery
: Rated current
Test Methods and
Remarks
: At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.
LHL□□□ :
Temperature
Humidity
: 40±2℃
: 90～95%RH
Duration
: 1000＋48/-0 hrs
Applied current
Recovery
: Rated current
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.
26. Loading at high temperature
CAL45 Type
△L/L : Within ±10%
Specified Value
LHL□□□
FBA/FBR
CAL45 Type :
Temperature
Duration
: 85±2℃
Test Methods and
Remarks
: 1000 hrs
Applied current
Recovery
: Rated current
: At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.
27. Low temperature life test
CAL45 Type
△L/L : Within ±10%
Appearance : No abnormality
Specified Value
LHL□□□
Inductance change : Within ±10%
Q change : Within ±30% (LHLP : only △L/L)
FBA/FBR
CAL45 Type :
Temperature
Duration
: －25±2℃
: 1000 hrs
Test Methods and
Remarks
Recovery
: At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.
LHL□□□ :
Temperature
Duration
:－40±3℃
: 1000＋48/-0 hrs
Recovery
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.
28. High temperature life test
CAL45 Type
Appearance : No abnormality
Specified Value
LHL□□□
Inductance change : Within ±10%
Q change : Within ±30% (LHLP : only △L/L)
FBA/FBR
LHL□□□ :
Temperature
Duration
Test Methods and
Remarks
: 105±2℃
: 1000＋48/-0 hrs
Recovery
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_reli_e-E02R01
AXIAL LEADED INDUCTORS（CAL Type）、
RADIAL LEADED INDUCTORS（LH Type）、
LEADED FERRITE BEAD INDUCTORS（FB Series A Type／R Type）
■PRECAUTIONS
1. Circuit Design
◆Operating environment
1. The products described in this specification are intended for use in general electronic equipment,(office supply equipment,
telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical
Precautions
equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear
control systems and medical equipment including life-support systems,) where product failure might result in loss of life, injury or
damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
2. PCB Design
◆Design
Precautions
1. Please design insertion pitches as matching to that of leads of the component on PCBs.
◆Design
Technical
1. When Inductors are mounted onto a PC board, hole dimensions on the board should match the lead pitch of the component, if not, it will
considerations
cause breakage of the terminals or cracking of terminal roots covered with resin as excess stress travels through the terminal legs.
3. Considerations for automatic placement
◆Adjustment of mounting machine
Precautions
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.
2. Mounting and soldering conditions should be checked beforehand.
Technical
◆Adjustment of mounting machine
considerations
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
4. Soldering
◆Wave soldering
1. Please refer to the specifications in the catalog for a wave soldering.
2. Do not immerse the entire inductor in the flux during the soldering operation.
◆Lead free soldering
1. When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering
heat, soldering etc sufficiently.
Precautions
◆Recommended conditions for using a soldering iron:
・Put the soldering iron on the land-pattern.
・Soldering iron's temperature - Below 350℃
・Duration - 3 seconds or less
・The soldering iron should not directly touch the inductor.
◆Reflow soldering
1. As for reflow soldering, please contact our sales staff.
◆Lead free soldering
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently
degrade the reliability of the products.
Technical
considerations
◆Recommended conditions for using a soldering iron
If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade
the reliability of the products.
5. Cleaning
Precautions
◆Cleaning conditions
1. CAL type, LH type
Please do not do cleaning by a supersonic wave.
◆Cleaning conditions
Technical
considerations
1. CAL type, LH type,
If washing by supersonic waves, supersonic waves may deform products.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_prec_e-E02R01
6. Handling
◆Handling
1. Keep the inductors away from all magnets and magnetic objects.
◆Mechanical considerations
1. Please do not give the inductors any excessive mechanical shocks.
2. LH type
Precautions
If inductors are dropped onto the floor or a hard surface they should not be used.
◆Packing
1. Please do not give the inductors any excessive mechanical shocks.
In loading, please pay attention to handling indication mentioned in a packing box (a loading direction / number of maximum loading /
fragile item).
◆Handling
1. There is a case that a characteristic varies with magnetic influence.
◆Mechanical considerations
Technical
1. There is a case to be damaged by a mechanical shock.
2. LH type
considerations
There is a case to be broken by a fall.
◆Packing
1. There is a case that a lead wire could be deformed by a fall or an excessive shock.
7. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the
storage area should be controlled.
Recommended conditions
・Ambient temperature 0～40℃
Precautions
・Humidity Below 70% RH
The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may
decrease as time passes.
For this reason, inductors should be used within one year from the time of delivery.
In case of storage over 6 months, solderability shall be checked before actual usage.
◆Storage
Technical
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes
and deterioration of taping/packaging materials may take place.
considerations
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_prec_e-E02R01
相关型号：
©2020 ICPDF网 联系我们和版权申明